Fully automatic buried booster box pump integrated wholesale

Yancheng Siyuan Water Supply and Drainage Equipment Co., Ltd

Professional technology, comprehensive after-sales service, providing fire safety qualifications and CCCF, including installation and fire safety acceptance!

Integrated installation steps of Baoji anti floating buried booster box pump

The inlet pipe of the buried box pump integrated pumping station equipment is directly connected to the tap water pipe network. Water is driven by the residual pressure of the tap water pipe network and pressed into the inlet pipe of the equipment. The booster pump of the equipment continues to pressurize on the basis of the residual pressure of the inlet water, increasing the water supply pressure to the pressure required by the user and supplying water to the outlet pipe network; When the user's water consumption is greater than the water supply of the tap water network, the pressure of the inlet pipe network decreases. When the pressure at the inlet of the equipment drops to less than 0 (or the set pipe network protection pressure), the negative pressure prevention and control device in the equipment automatically starts working, adjusting the operating status of the equipment until it stops and is ready for standby.

When the remaining pressure in the water supply network meets the user's water supply requirements, the equipment automatically enters a sleep state and is supplied directly to the user by the water supply network. When the water supply is insufficient, the equipment automatically resumes operation; When the user does not use water or uses very little water, the equipment automatically enters a shutdown sleep state. The small flow stabilizing and pressure maintaining tank located on the outlet side of the equipment maintains the user's water usage and pipe network leakage. When the user's water stabilizing and pressure maintaining tank cannot maintain the required pressure of the water supply pipe network, the equipment automatically wakes up and resumes normal operation. During the operation of the equipment, the remaining pressure of the tap water pipeline network is fully utilized, which not only does not have adverse effects on the tap water pipeline network, but also greatly meets the needs of users, reduces water supply energy consumption, and achieves the operation of the water supply system.

Integrated installation steps of Baoji anti floating buried booster box pump

1、 Installation requirements:

1. The integrated buried box pump adopts bolt connection method;

2. The above ground box pump is integrated through welding;

2、 Board requirements:

1. The integrated plate of the buried box pump: the top plate is made of 3.0mm galvanized steel plate, and the bottom and side plates are made of 3.4mm (composite of 0.4mm stainless steel and 3.0mm galvanized steel plate). The plate is formed by one-time stamping at a 45 ° angle

2. The integrated plate of the above ground box pump is a 304-2B stainless steel molded block with a thickness between 1.0-3.0. The specific thickness of the water tank is determined based on the water tank's capacity and the tank's capacity.

3、 Requirements for the inlet and outlet water pipelines of the pump station:

1. Inlet water: at high water level

2. Water outlet: dual channel water outlet

3. Overflow: twice the size of the inlet, leading to the collection pit

4、 Water pump requirements:

According to the new fire safety regulations, the use of submersible pumps is prohibited, and dry-type electric motors are used instead. The drawings show the use of dry-type electric motor well pumps, but the cost of this type of pump is *. So in general, dry motor vertical pipeline pumps are used.

Yancheng Siyuan Water Supply and Drainage Equipment Co., Ltd. has no middlemen to make a profit, reasonable prices, guaranteed quality, and excellent after-sales service. It is worth trusting! Interested parties are welcome to consult.