Flexible and convenient application of dust monitoring substation in garbage stations

Dust reduction hostDust monitoring substation

The ZP127-Z dust reduction host/dust monitoring substation has 4 sensor input interfaces, including 2 frequency inputs and 2 switch inputs, which can be matched with dust concentration sensors and thermal electric sensors to form an automatic dust reduction control device. The relationship between the output control and input signal of the dust reduction host can be programmed and set by the controller, which is flexible, convenient, and has a wide range of applications. The dust reduction host has an explosion-proof shell structure, which can output an inherently safe power supply to the sensor. It is suitable for environments with gas and deep dust explosion hazards in coal mines. Applicable fields: workshops, factories, silos, coal yards, garbage stations, commercial concrete stations, garden scenic spots, etc.

Dust reduction hostDust monitoring substation Product Parameters:

A) Working voltage AC127V, allowable voltage fluctuation range; 80%-120%

B) Sensor input interface

(1) 2-channel frequency signal input: 200-1000HZ green impulse width 20.3MS

(2) 2-channel switch signal input: low-level signal<08v; high-level signal 23.6 v<>

C) Output control interface

2 relay outputs, each relay including a set of normally open and a set of normally closed solution points