-
E-mail
2850368834@qq.com
-
Phone
13774435699
-
Address
No. 178 Changxiang Road, Nanxiang Industrial Zone, Jiading District, Shanghai
Product Categories
- DN300 electric valve
- Intelligent integrated electric valve
- Electric ball valve q941f-6c
- DN300 electric butterfly valve
- Stainless steel mining electric ball valve
- Mining electric valve
- Electric control valve manufacturer
- Electric threaded stainless steel ball valve
- Electric gate valve DN200
- Electric gate valve control box
Shanghai Huquan Valve Group Co., Ltd
Electric control valve manufacturer
NegotiableUpdate on 05/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The nominal diameter of the electric regulating valve manufacturer ranges from 20 to 200mm, with nominal pressures of 1.0, 1.6, 4.0, and 6.4MPa. The operating temperature range is from -40 ℃ to 450 ℃, and the received signal is 0~10mA.DC or 4~20mA.DC. The electric single seat regulating valve is suitable for situations with small pressure difference, high medium viscosity, or slight particle impurities.
Product Details
1Electric control valve manufacturerProduct Overview:
The nominal diameter of the electric flow regulating valve ranges from 20 to 200mm, with nominal pressures of 1.0, 1.6, 4.0, and 6.4MPa. The operating temperature range is from -40 ℃ to 450 ℃, and the received signal is 0~10mA.DC or 4~20mA.DC. The electric single seat regulating valve is suitable for situations with small pressure difference, high medium viscosity, or slight particle impurities. Electric sleeve regulating valve is suitable for situations with large pressure difference. According to the material of the sealing part of the valve, there are two types of seals: metal metal and non-metal metal seals. According to the different packing materials, it can be divided into two types: general packing seal and corrugated pipe seal. The former is used in general occasions, while the latter is used in important occasions where leakage is not allowed. The flow characteristics are linear or equal percentage. The electric flow control valve can be divided into two types of actuators: ordinary and electronic.
IIElectric control valve manufacturerTechnical Specifications:
Nominal diameter (DN) |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
|
Valve seat diameter (dn) |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
|
Rated flow coefficient (KV) |
straight line |
6.9 |
11 |
17.6 |
27.5 |
44 |
69 |
110 |
176 |
275 |
440 |
630 |
875 |
1250 |
Wait for percentage |
6.3 |
10 |
16 |
25 |
40 |
63 |
100 |
160 |
250 |
360 |
570 |
850 |
1180 |
|
Allowable pressure difference (MPa) |
3.2 |
3.0 |
2.0 |
1.8 |
1.5 |
1.4 |
1.0 |
0,7 |
0.6 |
0.5 |
0.3 |
0.2 |
0.1 |
|
Nominal pressure (MPa) |
1.6, 2.5, 4.0, 6.4, 10.0 |
|||||||||||||
Rated stroke (mm) |
16 |
25 |
40 |
60 |
100 |
|||||||||
Valve cover form |
Standard Type (-17~+250 ℃), High Temperature Type (+250~+450 ℃), Low Temperature Type (-40~-196 ℃), Bellows Sealed Type (-40~+350 ℃) |
|||||||||||||
Cover form |
Bolt compression type |
|||||||||||||
sealing packing |
V-shaped polytetrafluoroethylene packing, V-shaped flexible graphite packing |
|||||||||||||
valve core type |
Single seat plunger type valve core |
|||||||||||||
flow characteristics |
Linearity, equal percentage |
|||||||||||||
Configure actuator category |
381L series electric actuators, PSL series electric actuators |
|||||||||||||
Actuator parameters |
Power supply voltage: 220V/50Hz, input signal: 4-20mA or 1-5V · DC, output signal: 4-20mA · DC |
|||||||||||||
Protection level: equivalent to IP55, explosion-proof mark: Exd Ⅱ BT4 (customized Exd Ⅱ BT6), manual operation function: handle | ||||||||||||||
Environmental temperature: -25~+70 ℃, environmental humidity: ≤ 95% | ||||||||||||||
