Electric ball valve q941f-6c

NegotiableUpdate on 05/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Electric ball valve q941f-6c: After being powered on, the actuator drives the ball valve to rotate 90 degrees. The ball has a circular through-hole passing through the axis. When the ball rotates 90 degrees, it should all appear as a spherical surface at the inlet and outlet, thereby cutting off the flow. Otherwise, it should appear as a through-hole, allowing the medium to pass through. The full bore spherical cavity provides a low resistance, straight channel for the medium.

Product Details

1Electric ball valve q941f-6csummary:

After power on, the actuator drives the ball valve to rotate 90 degrees, and the ball has a circular through-hole passing through the axis. When the ball rotates 90 degrees, it should all appear spherical at the inlet and outlet, thus cutting off the flow. Otherwise, it should appear as a through-hole, allowing the medium to pass through. The full bore spherical cavity provides a low resistance, straight channel for the medium. The quick rotation of the pneumatic actuator by 90 degrees can instantly close the ball valve tightly, and the direct connection between the actuator and the valve body reduces the probability of failure. The flange connected pipeline can maintain good sealing performance, facilitate maintenance and replacement, and facilitate the closure of the pipeline. Compared to the Q941F46-16C electric fluorine lined ball valve, it highlights its explosion-proof advantages and can be used in places with explosion-proof requirements. However, the F46 fluoroplastic lining can be used in most strong acid, strong alkali, and highly corrosive chemical media. Therefore, based on these two factors, Jiangsu Aikimi Valve Manufacturing Co., Ltd. has developed a new explosion-proof electric fluorine lined ball valve.

IIElectric ball valve q941f-6cTechnical parameters and performance:

CH actuator technical parameters		Valve body parameters
power supply	AC200/220V，50/60Hz	Nominal Diameter	DN10～300mm
output torque	50N·M～2000N·M	Nominal Pressure	PN1.6 2.5 4.0 6.4 31.5MPa(定制)
range of motion	0～90° 0～360°	leakage	Soft seal: zero leakage	Hard seal: ≤ 10-5 of rated flow rate
Action Time	15 seconds/30 seconds/60 seconds	actuator	Can be equipped with PSQ, HQ, UNIC, 361RS separately Waiting for electronic electric actuators
protective device	Overheating protection/explosion-proof	flow characteristics	Quick opening feature
ambient temperature	-30°～60°	adjustable range	DN10-80	DN100-300
ambient temperature	-30°～60°	adjustable range	250:1	350:1
manual operation	Comes with a handle for operation	basic error	±1%
limit	Electrical and mechanical dual limit	dead zone	≤1%
Protection level	Equivalent to IP-65	backlash	≤1%
position measurement	Optional switch or potentiometer	Applicable Temperature	sealing surface
drive motor	8W/E		PTFE ≤ 150 ℃ RTFE ≤ 180 ℃ PPL ≤ 300 ℃ Hard seal ≤ 450 ℃
			PTFE ≤ 150 ℃ RTFE ≤ 180 ℃ PPL ≤ 300 ℃ Hard seal ≤ 450 ℃