The six digit multi parameter water quality analyzer can simultaneously measure: conductivity (electrode type) PH、 Six parameters: temperature, residual chlorine (imported electrode), turbidity, and dissolved oxygen. Each channel is independent of each other, without switching switches, and does not interfere with each other.

ST-L908Multi parameter online water quality analyzerCan simultaneously measure: conductivity (electrode type) PH、 Six parameters: temperature, residual chlorine (imported electrode), turbidity, and dissolved oxygen. Each channel is independent of each other, without switching switches, and does not interfere with each other.
1、 Conductivity:
1) Measurement range: 0.1-300 μ S/cm; (0.1 electrode); 1.0~3000μS/cm; (1.0 electrode); 10~30000μS/cm; (10.0 electrode).
2) Measurement temperature: 0-99.9 ℃.
3) Accuracy: ± 0.5% FS, ± 0.5 ℃.
II pH:
1) Measurement range: (0.00~14.00) pH.
2) Basic error of electronic unit: ± 0.02pH.
3) The basic error of the instrument is ± 0.05pH and ± 0.5 ℃.
3、 Temperature:
1) Measurement range: (0.0~100.0) ℃.
2) Basic instrument error: ± 0.5 ℃ (0.0 ℃≤ T ≤ 60.0 ℃); Other range: ± 1.0 ℃.
4、 Residual chlorine:
1) Range: (0-2.50, 0-5.00, 0-10.00, 0-20.00) mg/L;
2) Resolution: 0.01mg/L;
3) Repeatability: ± 2%.
5、 Turbidity:
1) Range: (0-20.00) NTU, (0-50.00) NTU, (0-100.0) NTU, (0-200.0) NTU; (0~4000.0)NTU;
2) Resolution: (0.001NTU), (0.001NTU), (0.01NTU), (0.1NTU); (1NTU)。
3) Repeatability: ± 10%.
6、 Dissolved oxygen:
1. Measurement range: 0-200ug/L, 0-20mg/L, with automatic range switching.
2. Temperature: -10~130 ℃
3. Resolution: 0.1ug/L, 0.01mg/L at 0.1 ℃
4. Accuracy: ug/L: ± 1.0% FS; mg/L: ± 0.5% FS, ± 0.3 ℃
5. Temperature compensation: Automatic (± 10 ℃ offset adjustment) Manual (calibration temperature can be set)
6、 Each channel is independent of each other, and the data of each channel is measured simultaneously.
7、 Conductivity pH、 Temperature, residual chlorine, and turbidity are displayed on the same screen.
8、 Current isolation output: independent 4-20 mA for each parameter (load<750>)
9、 Power supply: AC220V ± 22V, 50Hz ± 1Hz, optional DC24V ± 2.4V.
10、 RS485 communication interface (optional).
11、 Protection level: IP65.
TwelveMulti parameter online water quality analyzerWorking conditions: ambient temperature of 0-60 ℃, relative humidity ≤ 90%.