Domestic mixed granulator supplier

NegotiableUpdate on 05/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

GHL high-speed mixing granulator principle: This granulator is a new generation wet mixing granulator developed by our company. It extensively adopts technology based on existing granulators at home and abroad. The GHL machine has a reasonable structure, easy to use, and complete functions, fully reflecting the combination of equipment and process. The powder material and adhesive are thoroughly mixed into moist soft material in a cylindrical container by a bottom mixing paddle, and then cut into uniform wet particles by a high-speed grinding paddle placed on the side.

Product Details

High speed mixing granulator

The entire process consists of two steps: mixing and granulation.

2. The adhesive enters the material pot from the conical hopper, and after the hopper is closed, the powder rotates in the container under the stirring of the mixing paddle. At the same time, the material changes along the direction of the conical wall, gradually forming a liquid bridge. Under the squeezing, friction, and kneading of the material by the blades and cylinder walls, the material gradually transforms into a loose material. Then open the discharge door of GHL-150/200 wet granulation machine, and the wet particles are pushed out of the hopper by the centrifugal force of the blade.

3. The soft material with a granular structure is not formed by forced extrusion, but by cutting with a pelletizing knife. The soft material is cut into small and uniform particles in a semi flowing state, achieving mutual transformation of materials.

Main technical parameters and quotation

Product Model	GHL-150	GHL-200
Volume (L)	150	200
Production capacity (Kg)	50	80
Mixing speed (r/min)	180/270	180/270
Hybrid power (kw)	6.5/8	9/11
Cutting speed (r/min)	1500/3000	1500/3000
Cutting power (kw)	2.4/3	4.5/5.5

High speed mixing granulatorProduct Features

Teach traditional crafts to reduce adhesive by 25% and shorten drying time.

Fluidized granulation results in approximately spherical particles with good flowability.

Inflatable sealed closed drive shaft, can be switched to water during cleaning.

This machine adopts a horizontal cylindrical structure with a reasonable structure.

The entire operation has strict safety protection measures.

Completed in the same closed container, dry mixing wet mixing granulation, process reduction, in compliance with GMP standards.

Each batch is dry mixed for 2 minutes and granulated for 1-4 minutes, which increases efficiency by 4-5 times compared to traditional processes.