-
E-mail
13358304@qq.com
-
Phone
18851755900
-
Address
Liuhe District, Nanjing City
Product Categories
Nanjing Kaipude Pump Manufacturing Co., Ltd
0.75KW submersible centrifugal aerator QXB0.75 distributed oxygenation
NegotiableUpdate on 03/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
0.75KW submersible centrifugal aerator QXB0.75 distributed oxygenation $r $nQXB submersible centrifugal aerator adopts direct transmission of motor and impeller. It uses the centrifugal force generated by the rotation of the impeller to discharge the surrounding water and form a low-pressure area to suck in water flow. At the same time, a vacuum is created at the inlet of the impeller to suck in air,
Product Details
0.75KW submersible centrifugal aerator QXB0.75 distributed oxygenation
The QXB submersible centrifugal aerator is directly driven by a motor and an impeller. It uses the centrifugal force generated by the rotation of the impeller to discharge the surrounding water and form a low-pressure zone to suck in water flow. At the same time, a vacuum is created at the inlet of the impeller to suck in air,
Product Introduction
0.75KW submersible centrifugal aerator QXB0.75 distributed oxygenation
QThe XB submersible centrifugal aerator is directly driven by a motor and an impeller. The centrifugal force generated by the rotation of the impeller is used to discharge the surrounding water and form a low-pressure zone for sucking in water flow. At the inlet of the impeller, a vacuum is created to suck in air. In the mixing chamber, the air and water are fully mixed to form a uniform air-water mixture, which is quickly discharged under the action of centrifugal force. Due to the strong water jet, effective water circulation is created, causing the air to be sheared into a large number of tiny bubbles. It has increased its surface area, and due to the slow rise of bubbles, a large amount of oxygen in the air dissolves in water, making the power efficiency of this machine better than other types of aerators.
Enhance sludge activity QXB0.75 submersible centrifugal aerator
The QXB submersible centrifugal aerator is a self-priming aerator with a direct coupled structure. The centrifugal force generated by the rotating impeller creates negative pressure at the inlet of the impeller to suck in air and water. Using the function of the impeller, a certain proportion of air and water are mixed in the mixing chamber. Under strong centrifugal force, the two-phase flow of air and water is rectified along the tangential direction of the impeller through the flow channel, and then diffuses in the circumferential direction. The fine and tiny bubbles fully blend with the water, thus achieving the effect of oxygenation and aeration.
The QXB submersible centrifugal aerator is used in the aeration tank and aeration sedimentation tank of sewage treatment plants to oxygenate and mix the mixed liquid of sewage sludge, as well as for biochemical treatment of sewage or oxygenation of aquaculture ponds. The intake volume is 10-320 cubic meters per hour, the oxygenation capacity is 0.37-24 kilograms of oxygen per hour, and the motor power is 0.75-22KW.
Equipment name: Submersible centrifugal aerator
Product model: QXB0.75
Product brand: KAPUD
Power: 0.75KW
Material: Cast Iron
Diffusion tubes: 8 pieces
Voltage: 380V
Air intake volume: 10m3/h
Service diameter: 2.8 meters
