working principle
The awning removal machine mainly removes burrs from crops through the continuous stirring and friction of the spiral driving rod with low-speed spindle operation and the stationary driving rod on the cylinder wall. The angle of the pole and the degree of filling and friction inside the tube can be adjusted to adapt to the characteristics of different crops and achieve the best dehazing effect.
main purpose
The awning machine is mainly used for pre-treatment of awning crops such as wheat, rice, oats, etc., to prevent sieve blockage and improve the impurity removal effect of the selection machine. At the same time, it can also be used to remove the mud flower face on the surface of soybeans and polish other grains such as corn.
Operation and maintenance
operation
1. Before using the deburring machine, carefully read the user manual to understand the structure, performance, and usage of the machine.
2. Install and debug according to the instructions to ensure the normal operation of the machine.
3. During the operation, attention should be paid to observing the operation of the machine and adjusting the angle of the rod and the friction inside the cylinder in a timely manner.
maintain:
1. Regularly clean and maintain the deburring machine to remove dust and debris from the machine.
2. Check if the fasteners of the machine are loose, and tighten them promptly if they are loose.
3. Check the wear and tear of the machine, and replace any severely worn components in a timely manner.