Product Introduction
1 GPS PILOT automatic navigation steering system
2 can be connected to ISOBUS data bus
Three up to four controllers with flow control devices
4. Vehicle weight at factory
5 Mechanical Four Point Suspension Cab
When the engine speed decreases, the driving speed is 40 kilometers per hour or 50 kilometers per hour
Weight to power ratio and high load capacity of over 33 kg/horsepower (45 kg/kW)
8 long wheelbase, comfortable driving, reasonable weight distribution
9 HEXASHIFT four section gearbox
10 horsepower can reach 197 to 238 horsepower
Notes:
Before starting, check the lubricating oil, fuel, coolant, and tire pressure to confirm that all components of the tractor are in good safety and technical condition.
2. When starting the electric starter, it is forbidden to directly connect and start it with electricity. Do not use abnormal methods such as sloping or injecting fuel into the intake pipe to start.
Before starting, observe whether the readings and lights of each instrument are normal, whether there is any water leakage, oil leakage, air leakage or abnormal noise in various parts, and confirm the engine idle and idle speed; Observe whether there are people or obstacles around; When starting with agricultural machinery, the power of the machinery should be separated; When carrying lifting equipment, the equipment should be raised to a safe height.
When driving on the road, one should comply with road traffic safety regulations.
5. Tractors are only allowed to tow one trailer, and the trailer's lighting signals, braking, safety protection, and other devices should comply with national standards
6. The transportation of agricultural materials and other materials should meet the approved load capacity, and overloading is strictly prohibited; When loading and transporting flammable materials, smoking and fire are strictly prohibited, and fire prevention measures should be taken; It is strictly prohibited to carry passengers or cargo on trailers.
7. The driver's cab and driver's seat shall not be overcrowded, and no items that hinder operation or pose safety hazards shall be placed.
When attaching agricultural tools, the driving operator should closely cooperate with the assisting attaching personnel. The agricultural tools can only be attached after the tractor has come to a complete stop, and the safety pin should be inserted and the limit rod chain adjusted.
When transferring suspended agricultural tools, the tools should be raised to their designated position, the upper pull rod should be shortened, and the locking device of the hydraulic system or suspension mechanism should be used to secure the tools.
10. Suspended agricultural tools should be lowered to the ground before troubleshooting or replacing parts. If they must be operated in the raised position, they should be locked in the raised position and firmly supported with a support.