-
E-mail
wnd8808@163.com
-
Phone
18502293228
-
Address
No. 3 Jingxiang Road, Beichen Science and Technology Park, Beichen District, Tianjin
Product Categories
Tianjin Wonengda Industrial Co., Ltd
YC-1.5 waterwheel aerator
NegotiableUpdate on 10/03
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
YC-1.5 waterwheel aerator
Product Details
YC-1.5 waterwheel aerator
1Product Introduction:
Jinhu brand waterwheel aerator2006year1After menstruation, the fishery machinery was tested by the Quality Supervision and Inspection Center, and all nine indicators met industry standardsSC/T6017-1999The specified requirements, including oxygenation capacity2.59kg（02）hExceeding the standard requirements36.8%The water wheel type aerator consists of a vertical motor, gearbox, impeller, floating boat, frame, etc.
2Product advantages:
（1）Adopting arc-shaped bevel gears instead of turbine vortex rods, it has high energy-saving efficiencyMore energy-efficient than traditional models20%
The above.2（
）The arc-shaped umbrella gear is made of chromium manganese titanium alloy steel, with surface carbon nitrogen co diffusion, high hardness, and long service life.3（
）Using mechanical seals to ensure no oil leakage or pollution.4（
）The aerator motor is equipped with a protector to prevent accidental burning of the motor.5（
3）Integrated plastic floating boat, nylon impeller, stainless steel shaft and bracket.
|
Product parameters: |
model |
power voltage |
V/50HZ load |
Water surface (mu)Power efficiencyKG（H-KW |
）Oxygenation ability |
KG/HnoiseDB（A |
）Total weight |
20KGContainer Set |
|
|
SET tile |
KW horsepower |
||||||||
|
HP |
0.75 |
1 |
380 |
YC-0.75 |
1-51.25 |
≥1.1 |
≥80 |
80 |
85 |
|
≤ |
1.5 |
2 |
380 |
YC-1.5 |
3-101.25 |
≥1.5 |
≥78 |
100 |
70 |
4≤
Precautions:4.1.The aerator adopts380V
Three phase AC power, the power supply must use a dedicated circuit, and the connection must be carried out by experienced electricians according to the electricity usage and operation procedures.4.2.The motor must be equipped with a leakage protection device to prevent the motor from burning out due to undervoltage, phase loss, circuit damage, and other reasons, which may lead toaerator
Cannot function properly.4.3.
The power supply is three-phase AC power, using three-phase four wire copper core rubber cables. The wiring should be firm and the grounding should be reliable.4.4.Fill the gearbox with oil before use10#—30#
Oil to the oil inspection hole position to prevent damage to components and motors caused by working without oil in the gearbox.4.5.
4.6It is strictly prohibited to use metal wires such as iron wire to connect or fix the aerator.
4.7When maintaining, servicing, handling, and disassembling the aerator, the power must be cut off to ensure personal safety.
