XBM-II plastic film stretching spline prototype

XBM-IIPlastic film stretching spline prototypeInstrument Introduction

This machine is suitable for biaxially oriented thin films（BOPP、BOPC、BOPET、BOPA）、 Preparation of test strips for tensile testing of uniaxial stretch films and their composite films (bags).

meet the standard

comply withThe relevant provisions on spline size in Article 6.1.1 of GB/T1040.3-2006/ISO527-3:1995 "Determination of Tensile Properties of Plastics Part 3: Test Conditions for Thin Films and Sheets".

Instrument Features

The machine holds plastic film samples firmly, with sharp cutting tools that are easy to replace; Easy to operate, safe and reliable to use; Multiple layers, multiple or multiple splines can be cut at once; Quantity of samples that can be prepared at once12 pieces, including 5 pieces with a width of 15mm and 7 pieces with a width of 10mm; In addition, users can change the tool configuration according to their needs and simultaneously cut four types of splines: 10mm, 15mm, 20mm, and 25mm.

Compared with the punching and cutting method, the cutting method of this machine produces samples with flat edges and parallel edges without defects on both sidesUnder a magnification ratio of 20x, no defects were observed, and the cut sample ensures that the mechanical properties of the film are not affected. Its tensile strength and elongation at break data are accurate, reliable, and consistent.

XBM-IIPlastic film stretching spline prototypeTechnical Specifications

Sample width:10mm×(6+1)articleThe15mm×(4+1)Article;

Sample preparation error:≤±0.1mm；

Sample length:220mm；

Cutting thickness:≤0.25mm；

Overall dimensions:290mm(Long)×230mm(Width)×150mm(High);

Weight: Approximately25kg；