Wholesale of surface inspection lamps

NegotiableUpdate on 01/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

If the surface inspection lamp UIH-3D of the ultra-high brightness lighting device shines high brightness light on the object (※ 1), it will cause vibration, surface damage and debris, internal foreign objects and bubbles can be easily confirmed by visual inspection. ※ 1: Semiconductor chips, mask glass, hard drives, LCD panels, lenses, etc!

Product Details

Ultra high brightness lighting device surface inspection lamp UIH-3D

Product feature introduction:

Manufacturing sites for measuring devices such as ignition monitoring devices (TAM series), ultra-high brightness lighting devices (UIH-1, UIH-2, UIH-3), and semiconductor chip cross-sectional shape measuring devices (WEMS, VSSW).

UIH-1C specification

High brightness halogen lamp (15V 150W) is used.

超高亮度照明装置表面检查灯UIH-3D

UIH-2D specification

High brightness halogen lamp (100V 300W) is used.
Equipped with automatic shutdown function when the lightbox heats up abnormally.

超高亮度照明装置表面检查灯UIH-3D

UIH-3D specification

High brightness halogen lamp (100V 650W) is used.
Equipped with automatic shutdown function when the lightbox heats up abnormally.

UIH-1C specification

Lamp rated value	15V 150W
Design irradiation diameter and distance	Diameter 40mm at 180mm from the top of the lamp tube
maximumbrightness	Approximately 600000 lux above the center of the illuminated diameter
500000 lux irradiation diameter	Approximately 45mm in diameter
Distance and brightness at double diameters	360mm approximately 150000 lux
Brightness deviation and variable width	Maximum brightness deviation: upper limit of 10%, lower limit of 20%, variable width of 10:1 or more
Maximum brightness lamp lifespan	50+hours
Half brightness bulb lifespan	Over 800 hours
Dimming method	Thyristor phase control
Cooling inside the lamp room	Method of using a fan for forced air cooling
Heat monitoring inside the lightbox	not any
Lightbox cooling maintenance (* 1)	not any
power supply	AC100V Transformer Type
Total weight	About 7 kilograms

*To protect the light bulb, even when the main power switch is turned off, the fan can still maintain cooling until the temperature inside the lamp chamber drops below about 40 ℃.

UIH-2D specification

Lamp rated value	100V 300W
Design irradiation diameter and distance	Diameter 70mm at a distance of 200mm from the lamp tube
maximum brightness	Approximately 400000 lux above the center of the illuminated diameter
500000 lux irradiation diameter	Approximately 60mm in diameter
Distance and brightness at double diameters	400mm approximately 100000 lux
Brightness deviation and variable width	Maximum brightness deviation: upper limit of 10%, lower limit of 20%, variable width of 10:1 or more
Maximum brightness lamp lifespan	75 hours or more
Half brightness bulb lifespan	Over 1000 hours
Dimming method	Controllable silicon control (50/60Hz automatic switching)
Cooling inside the lamp room	Method of using a fan for forced air cooling
Heat monitoring inside the lightbox	When the temperature exceeds about 100 ℃, the lamp will be forcibly turned off.
Lightbox cooling maintenance (* 1)	Yes
power supply	AC100V Half Transformer Type
Total weight	About 9 kilograms