Wholesale of supply pipeline pumps

ISG vertical pipeline clean water pumpIt is designed by our company based on the advantages of IS centrifugal pump and SG type pipeline pump, using ISO2858 standard. Suitable for high-rise buildings, garden sprinkler irrigation, pipeline pressurization, hot and cold water circulation, cooling tower waterproofing, long-distance water delivery, refrigeration flushing, bathroom and other occasions for suction, pumping, pressurization and circulation. It is an ideal product to replace IS, BA centrifugal pumps and SG pipeline pumps. Use temperature below 80 ℃.

ISG vertical pipeline clean water pumpPerformance characteristics:

1. The pump is a vertical structure with the same inlet and outlet diameters and located on the same centerline. It can be installed in the pipeline like a valve, with installation feet to increase the stability of the pump. It has a compact and beautiful appearance, small footprint, and low construction investment.

2. The ISG pipeline pump impeller is directly installed on the extended shaft of the motor, with a short axial dimension and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, thereby ensuring the smooth operation of the pump and low vibration noise.

3. The shaft seal adopts mechanical seal or a combination of mechanical seals, using imported titanium alloy sealing rings, medium-sized high-temperature resistant mechanical seals, and hard alloy materials for wear-resistant seals, which can effectively increase the service life of mechanical seals.

4. The ISG pipeline pump is easy to install and maintain, without the need to disassemble the pipeline system. Simply remove the pump coupling nut to extract all rotor components.

5. Pumps can be operated in series or parallel according to the requirements of flow rate and head.

6. Vertical and horizontal installation of pumps can be adopted according to the requirements of pipeline layout.

working conditions

1. The high working pressure of the vertical pipeline centrifugal pump system is 1.6MPA, which means the pump suction pressure+pump head is less than 1.6MPA, and the pump static pressure is 2.5MPA

2. Applicable medium: Solid insoluble matter with a volume content not exceeding 0.1% of the unit volume

3. The ambient temperature should not exceed 40 ℃ and the relative humidity should not exceed 95%.