Wholesale of carbon dioxide shaker

Setting of multiple temperature zones for CO2 cell culture shakerCarbon dioxide shaker is a device that combines the functions of a carbon dioxide incubator and shaker, mainly used for cell culture and other biological experiments. The following are the basic principles of its cultivation:
1. Control environmental conditions
The carbon dioxide shaker provides a stable growth environment for cells by precisely controlling the temperature, humidity, and carbon dioxide concentration in the cultivation environment. This is crucial for maintaining the physiological state of cells and promoting their growth.
2. Provide appropriate concentration of carbon dioxide
During cell culture, the concentration of carbon dioxide is crucial for maintaining the pH value of the culture medium. The carbon dioxide shaker provides an appropriate concentration of carbon dioxide to the inside of the incubator through a built-in carbon dioxide control system, ensuring that the pH value of the culture medium remains within the appropriate range, which is beneficial for cell growth.
3. Oscillatory function
In addition to controlling environmental conditions, the carbon dioxide shaker also has oscillation function. This function promotes the uniform distribution of oxygen and nutrients in the culture medium through mechanical vibration, while also helping to eliminate metabolic waste. This helps to improve the efficiency and uniformity of cell culture.
4. Microcomputer control system
Modern carbon dioxide shakers are usually equipped with microcomputer control systems, which can accurately control and monitor temperature, carbon dioxide concentration, and other key parameters. These systems may also include alarm functions to alert users when parameters deviate from the set range.
5. Sealing and insulation properties
In order to maintain stable environmental conditions, the box design of carbon dioxide shaker usually has good sealing and insulation properties. This helps to reduce the influence of external environment on internal culture conditions, further ensuring the success rate of cell culture

Technical Specifications

Setting of multiple temperature zones for CO2 cell culture shakerThe carbon dioxide shaker is a new generation of large capacity horizontal shaker developed based on the introduction of similar foreign product technology. This machine integrates carbon dioxide cultivation, constant temperature cultivation, and oscillation, and is versatile. It has the characteristics of large capacity, high temperature control accuracy (using a microcomputer temperature control system with a temperature control accuracy of ± 0.5 ℃), wide temperature control range (with both heating and cooling functions), and stable speed. The carbon dioxide shaker adopts AC variable frequency speed regulation, which is suitable for long-term and high-intensity work environments. It has the characteristics of high torque, no noise, stable speed, low energy consumption, environmental protection, and long service life. Its quality is much higher than ordinary DC motors. Very suitable for large capacity rocking beds or rocking beds that require long-term work.
Operating instructions for CO2 shaker
1. Using at medium speed within the speed range can extend the lifespan of the instrument.
2. The instrument should be placed on a flat ground, with a clean and tidy environment, moderate temperature, and good ventilation.
3. Before using the instrument, place the speed control knob in the minimum position.
4. Open the lid of the box and pack the culture test bottles. In order to ensure good balance performance of the instrument during operation and avoid significant vibration, all test bottle positions should be filled when bottling, and the culture solution in each bottle should be roughly equal. If there are not enough culture bottles, the test bottles can be symmetrically placed or filled with other equal amounts of solution to fill the empty spaces.
5. After the container is installed, close the lid, turn on the power, and turn on the power switch. If temperature control is required, you can turn on the temperature control switch and set the desired temperature on the temperature controller. The operating instructions for the temperature controller of this machine can be found in the "Intelligent Temperature Controller Operating Manual".
6. Turn on the corresponding oscillation switch and set the speed to the desired speed (see the frequency converter manual for the speed setting of AC frequency converter). When starting, the speed should be gradually increased from small to large, and should not be set too fast at once. To extend the service life of the machine, it is recommended to use it at a medium speed within 250rpm.
7. After use, the oscillation speed should be adjusted to the lowest possible level and the oscillation switch and temperature control switch should be turned off before turning off the main power supply.