Which is a good retractable steel plate protective cover

Machine tool steel plate protective coverThe steel telescopic guide rail protective cover is made of high-quality 2-3mm thick steel plate cold pressed, and can also be made of stainless steel according to requirements. Special surface polishing will increase its value. We can provide corresponding guide rail protection types (horizontal, vertical, inclined, horizontal) for all types of machine tools.

Machine tool steel plate protective cover:Steel telescopic guide rail protective cover is a traditional form of protection for machine tools. Steel telescopic guide rail protective covers are widely used in this field, playing an effective protective role in preventing chips and other sharp objects from entering. Through certain structural measures and suitable scraper plates, the infiltration of coolant can also be effectively reduced. Our factory's steel telescopic guide rail protective cover can meet the constantly improving requirements of modern machine tools in terms of high technology, correct installation position, and high operating speed.

Technical data

The steel telescopic guide rail protective cover is made of high-quality 2-3mm thick steel plate cold pressed, and can also be made of stainless steel according to requirements. Special surface polishing will increase its value. We can provide corresponding guide rail protection types (horizontal, vertical, inclined, horizontal) for all types of machine tools.

The protective cover structure we have developed varies depending on the operating speed and guide rail. We are equipped with polyurethane or brass sliders for speeds below 10m/min. We are equipped with rollers for speeds below 30m/min. In addition, a buffer system is required between the drive board, scraper board, and suction board. The purpose of the slider buffer system is to reduce collisions, noise, and friction.

The number of sections of the steel telescopic guide rail protective cover is important for its proportion, weight, and operating characteristics. Each section should be as long as possible to reduce the number of sections and lower costs. In general, the ratio of stretching to minimum compression should be between 3:1 and 5:1.

1. Durable, smooth operation, low noise, and beautiful appearance.

2. The steel plate protective cover is suitable for high-speed machine tool guide rail protection, which is both stable and free of vibration noise.

3. The steel plate protective cover device not only protects the service life of the protective plate, but more importantly, ensures the precision of the machine tool.

4. Each section of the steel plate protective cover is simultaneously pulled apart and retracted in parallel, allowing for smooth operation.

5. The steel plate protective cover will not cause the protective plate to detach or make impact sounds, which is both aesthetically pleasing and improves the service life of the protective plate.

On the basis of the original sealing strip, a layer of stainless steel cover plate was added to prevent iron filings from burning the sealing strip at high temperatures and damaging the guide rail by rubbing it into the track surface.