Which is a good personal protective bag

1ecological environmentlaw enforcementPersonal protective bagJN-GRFHB200According to the standard: "Guidelines for Standardization Construction of Comprehensive Administrative Law Enforcement Equipment for Ecological Environment Protection"(2020年版)》.

2、 Ecological environment law enforcementPersonal protective bagJN-GRFHB200 配置

According to the "Guidelines for Standardization Construction of Comprehensive Administrative Law Enforcement Equipment for Ecological Environment Protection (2020 Edition)"Ecological environment law enforcementPersonal protective bagJN-GRFHB200Equipped with strong light flashlights, safety helmets, protection against toxic and harmful substances, radiation protection equipment, goggles, protective shoes, face shields, etc.

3、 Ecological environment law enforcementPersonal protective bagJN-GRFHB200 Detailed Features

1Strong light flashlight

1）Timely zoom system, quick switching between wide-angle/telephoto modes for both near and far use;

2）Wide angle floodlighting;

3）Eagle eye focusing;

4）USB segmentation, charge management system;

5）Size: 127X28cm;

6）Six stage heat dissipation effectively ensures chip operation;

7）Gear: Strong light, power-saving, flashing, double-click extreme;

8）Battery life: Strong light for 3.5 hours;

9）Battery capacity: 2300mAh;

10）Wattage: 15W;

11）Range: about 200m;

12）Weight: 160g;

13）Charging method: Type-C USB fast charging.

2Safety helmet

1）Shelf life: 30 months.

2）Lightweight and breathable, adjustable ventilation holes for heat dissipation;

3）The impact resistant HDPE material cap shell design exceeds the requirements of national and European standards;

4）Adjustable shock-absorbing lining, ergonomic design, comfortable to wear;

5）Triple protection design: HDPE material, H-shaped frame strong support, secondary reinforcement top reinforcement protection;

6）Head circumference: 51-62cm;

3Protection against toxic and harmful substances

1）Three piece hood and chin protection design, matched with facial mask;

2）Special seam treatment, on the basis of locking the edge seam, an additional 5 layers of chemical resistant film composite tape are applied to improve the seam strength and provide effective liquid and particle protection to the seam area.

3）Double layered placket zipper structure effectively blocks chemical liquids;

4）There is a thumb ring at the cuff to fix the position of the sleeve;

5）Thin film technology, with soft fabric and no noise during wearing and movement;

6）Seal the joint with transparent multi-layer extruded composite tape;

7）Made of 92gsm thick durable material, the fabric is composed of anti-static treated inner non-woven fabric and outer composite film, which can provide a high level of liquid protection;

*8）CE protection category III certification, protection category 3/4/5/6.

4Radiation protection equipment

1）Sensor: GM counter tube:

2）Measurement range: 0.05 μ Sv-50mSv;

3）Measurement accuracy: -17% -+25% based on¹³⁷CSγ；

*4）Battery life of 20 days (continuous measurement, without using particle sound);

*5）Charging interface: TYPE-C interface (green light stays on during charging, turns off when fully charged);

6）Alarm response time: less than 10 seconds;

7）Alarm threshold deviation: -17% -+25%:

8）Weight: 128g;

9）Size: 120 * 66 * 24mm.

5Protective goggles

1）Material: Polycarbonate lenses.

2）Scratch resistant coating;

3）Side wing ventilation design, while discharging moisture, reduces the entry of dust;

*4）Wear the Chinese Labor Safety LA logo (photo proof required); A testing report from a labor product testing agency with CMA qualification is required.

6Protective shoes

1）Function: Anti smashing, anti piercingWear resistant, etc；

2）Shoe upper material: cowhide;

3）Sole: Thick and wear-resistant rubber outsole;

4）Bring LA safety certification logo and certificate.

7、Personal protective bag(Empty package)

1）Size: 20 inches;

*2）Material: Oxford cloth+PE, slightly thickened wear-resistant plastic bottom;

*3）Carrying method: Can be carried over the shoulder or crossbody, can be carried by hand, can be pulled (with pulley), and the pull rod is detachable;

4）Equipped with waterproof coating/wear-resistant, scratch resistant, and unbreakable;

5）Size: 50 * 21 * 33cm;

*6）Customize logos as needed.

8Protective face mask

1）Configuration: Half face mask X1, filter box X2, filter cotton cover X2, filter cotton X2.

2）Double filtration can filter out gasoline, benzene and its homologues, organic vapors, carbon disulfide, dust, acetone, ether, etc;

3）3M electrostatic filter material, low respiratory resistance, high protection efficiency;

4）Service life: can be used cumulatively for 200 hours;

5）Main material: silicone;

6）Adjustable headband with four levels of elastic adjustment for comfortable wearing position, polyester/spandex textile headband with long-lasting elasticity;

7）Cold flow exhalation valve reduces respiratory resistance and stuffiness, making exhalation smoother;

8）Precision injection molding provides higher precision and product stability, reduces the number of components, and simplifies the cleaning process;

※ 9) The product has obtained certification from multiple countries: LA certification in China;