Water soluble fertilizer equipment, liquid fertilizer equipment

Water soluble fertilizer equipment, liquid fertilizer equipmentEquipment Instructions

Anhui Xinyuan has launched a complete set of production equipment for liquid fertilizers since 2013, including processes such as automatic metering and batching, mixing and blending, sedimentation and filtration, and quantitative filling. In 2014, Xinyuan launched an environmental protection project to turn waste into treasure, turning biogas slurry into fertilizer and solving the problem of biogas slurry pollution.

The microbial fermentation process is mainly divided into 5 steps. 1. Liquid storage: After pre-treatment, the biogas slurry is sent to the raw material tank, and after storage, it is sent to the fermentation tank; 2. Inoculate fermentation, the biogas slurry enters the fermentation tank, inoculates specific beneficial organisms, and is thoroughly stirred and mixed. After the liquid stays in the fermentation tank, it is sent to the ingredient tank; 3. Nutrient ingredients need to be added to the biogas slurry according to strict process procedures to ensure that the quality of fertilizers meets national standards; 4. Store the liquid, add nutrients to the liquid and send it to the finished product tank. After storage, send it to the packaging tank; 5. Packaging, automatic filling of finished liquid fertilizers.

workflow

raw material- Reactor - Transfer pump - Double filter/grinding - Storage tank - Transfer pump - Filling machine - Capping/capping - Transfer

Performance Characteristics

1. The system adopts PLC automation program control, automatically proportioning according to the prescribed formula, greatly saving labor costs and waste caused by manual ingredient errors

2. The temperature and time of material boiling can be automatically controlled

3. The system equipment is equipped with a sewage discharge mechanism for easy cleaning after production

4. This machine is made of corrosion-resistant 304 stainless steel material, and special materials can be optionally equipped with 316 stainless steel

Main technical parameters

1. User interface: DN65 material inlet pressure<0.6Mpa;

2Outer diameter of canning head:ф 40mm；

3. Applicable bottleneck: Small 140 * 200 * 320mm; Large 260 * 290 * 500mm;

4. Filling range: 5-30kg;

5Measurement accuracy:± 0.2% (note: filling accuracy depends on the viscosity of the material and the continuity and stability of material supply);

6. Packing speed: ≤ 250 barrels per hour (5kg);

7. Gas source pressure: 0.6-0.7 megapascals;

8. Gas consumption: 120L/min;

9. Power supply:~380 volts, 30 hertz

10. Total power: 1.6KW

11. Weight: approximately 1000kg;

12. Dimensions: 8700 * 1350 * 230mm (length * width * height)

Water soluble fertilizer equipment, liquid fertilizer equipmentSpecify functions, processes, and equipment configurations
2. Process:

Raw material package conveying ->feeding to each raw material warehouse mouth ->computer batching according to the formula (electronic weighing) ->automatic unloading ->automatic lifting ->automatic mixing uniform ->automatic unloading to the quantitative packaging machine silo (material level automatic control) ->automatic weighing and measuring ->automatic filling ->conveying ->inner bag hot sealing ->outer bag seam packaging.

3. Equipment configuration:

(1) One upper packaging conveyor

(2) 1 set of automatic computer batching system

(3) 1 set of lifting device

(4) 1 set of automatic mixing system

(5) 1 transfer silo

(6) 1 set of measuring, filling and packaging system

(7) 1 set of maintenance platform

(8) 1 set of production line control cabinet and electrical control system

2、 Technical specifications

1. Packaging materials: powder or crystal.

2. Production capacity: 8 tons/hour (according to 10Kg/bag specification).

3. Packaging specifications: 5-25Kg/bag.

Technical Specifications

1.容积： 0.5m³，1m³，2m³，3m³，5m³，10m³

3. Mixing speed: 31-43r/min

4. Mixing form: blade type

6. Structure: jacketed/single-layer

7. Equipment material: 304 stainless steel/316 stainless steel

8. There is a liquid level display and control device

Main Features

1This machine is suitable for fluid metering and filling, automatically completing the process of feeding, positioning, filling, discharging, and capping/A series of operations including capping, aluminum foil sealing, and coding. Widely used in industries such as fertilizers, chemicals, food, and pharmaceuticals.

2This machine adoptsPLC automatic control system, touch screen for operation and control, convenient for adjusting parameters, can be matched with capping/screw capping, aluminum

Linkage of foil sealing, coding machine and other equipment.

3. The submersible filling method can effectively reduce the production of foam and meet the filling of materials with different characteristics.

4. Each barrel position adopts two methods of photoelectric and weighing, achieving no filling without barrels.

The whole machine adopts corrosion-resistant technologyMade of 304 stainless steel material, special materials are used for contact between strong acid and alkali materials.

Technical Specifications