Water quality monitoring station monitoring system

NegotiableUpdate on 04/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The LSZ06 vertical water quality online monitoring station uses water quality sensors (water temperature, conductivity, pH, dissolved oxygen, ammonia nitrogen, turbidity) as the core. By monitoring and analyzing various water quality parameters, and transmitting the collected data to the platform, real-time data can be remotely viewed and equipment can be remotely managed. At the same time, effective over limit alarms and intelligent processing of water quality trends can be carried out. The comprehensive index of water quality can also be expressed based on the correlation combination between real-time water quality parameters, providing customers with a large amount of objective and detailed effective data, which has practical significance for solving water pollution problems.

Product Details

1、 Product Introduction

At present, the LSZ06 water quality monitoring station is widely used in aquaculture, sewage treatment, reservoirs, rivers and other places

2、 Product Features

1. Low power collector: Static power consumption less than 50uA

2. Standard GPRS networking, support for extended Bluetooth, wired transmission

3. Support modbus485 sensor expansion

4. Solar charging management MPPT automatic power point tracking

5.1.5-meter carbon steel bracket

6. SMS alarm, send SMS to the phone after exceeding the limit

7. ABS material protective box, corrosion-resistant, anti-oxidation, waterproof rating IP66

8. No additional processes such as wiring, building station buildings, dispensing chemicals, and personnel maintenance are required. Compared to the national standard station for water quality monitoring, it is more convenient to use and install, and the observation data is more intuitive

9. The system can integrate integrated meteorological environment monitoring data

3、 System composition

The upright water quality online monitoring system mainly consists of a foundation support (including upright poles, ground cages, ABS anti-corrosion and corrosion-resistant protection boxes), a power supply system, a monitoring host, water quality sensors, and a cloud platform.

4、 Technical parameters

serial number	name	measurement range	Measuring principle	measurement accuracy	Is it standard	remark
1	temperature	0~50℃	High precision digital sensor	±0.3℃	✔
2	pH	0~14（ph）	Electrochemistry (salt bridge)	± 0.1PH	✔
3	ORP	-1500mv~1500mv	Electrochemistry (salt bridge)	± 6mv
4	conductivity	0~5000uS/cm	Contact electrode method	± 1.5%	✔
5	turbidity	0~40NTU (low turbidity)	scattered light method	± 1%		Low turbidity can be customized
		0~1000NTU (medium turbidity)	scattered light method	± 1%		Medium turbidity can be customized
		0~3000NTU (high turbidity)	scattered light method	± 1%	✔	default hair
6	dissolved oxygen	0~20mg/L	Fluorescence lifetime method	± 2%	✔
7	ammonia nitrogen	0~100mg/l	Ion selective electrode method	±1mg	✔
8	cod	0~500mg/ L	UV254 absorption method	±5%		By default, both COD and turbidity are integrated; Equipped with an automatic cleaner, it can prevent biological attachment, avoid light window pollution, and ensure long-term monitoring stability; Automatic cleaning time and frequency can be set, with a power consumption of 0.7W
8	turbidity	0~400NTU	scattered light method	± 1%
9	suspended solids	0~2000mg/L	scattered light method	± 5% (depending on sludge homogeneity)
10	chlorophyll	0~400ug/L	fluorescence method	R2>0.999		Equipped with an automatic cleaner, it can prevent biological attachment, avoid light window pollution, and ensure long-term monitoring stability; Automatic cleaning time and frequency can be set, with a power consumption of 0.7W