- Phone
-
Address
No. 278 Hongqi Road, Nankai District, Tianjin
Tianjin Tractor Manufacturing Co., Ltd
No. 278 Hongqi Road, Nankai District, Tianjin

| project | unit | design value |
| The reasonable minimum power code (horsepower) for the model in this appraisal unit | / | 50 |
| Whole machine model and name | / | TNJ700、 wheeled tractor |
| Whole machine type | / | wheeled |
| Whole machine rack type | / | shelf-less |
| Whole machine drive type | / | two-wheel drive |
| Application of the whole machine | / | General purpose |
| Overall dimensions of the machine (length x width x height and location) | mm | 3550 × 1300 × 2265 (top of safety rack) |
| wheelbase | mm | 1895 |
| Common wheelbase (front/rear wheels) | mm | 960/1150 |
| Track width (front/rear wheels) | mm | 960, 1100, 1200/940-1150 |
| Minimum ground clearance and location | mm | 325 (bottom of rear towing seat) |
| The horizontal distance from the front end face of the clutch housing to the axis of the rear drive shaft | mm | 1070 |
| Center distance of gearbox gear counter shaft hole | mm | 80.5 |
| The horizontal distance from the center line of the drive wheel axle to the center line of the guide wheel axle of a full track tractor | mm | / |
| Minimum usage quality | kg | 1600 |
| Standard counterweight (front/rear) | kg | 72/60 |
| Ground contact pressure of track | KPa | / |
| Minimum usage ratio quality | kg/kW | 31.07 |
| Number of gears (forward/reverse) | / | 8/2 |
| Number of main transmission gears | / | 4+1 |
| Number of auxiliary transmission gears | / | 2 |
| Design theory speed | km/h | 30.01 |
| Connection method between engine and main clutch | / | direct connection |
| Model of rollover protection device | / | TE804.46.01 |
| Type of rollover protection device | / | Security Framework |
| Overturning protection device production plant | / | Tianjin Tractor Manufacturing Co., Ltd |
| Engine model | / | YN4EZ070-32CR |
| Engine structural type | / | Straight line, direct injection, water-cooled, four stroke |
| Engine manufacturing plant | / | Kunming Yunnei Power Co., Ltd |
| Engine intake mode | / | Naturally Aspirated |
| Number of engine cylinders | / | 4 |
| Engine calibration power | kW | 51.5 |
| Rated net power of engine | kW | 51.5 |
| Engine calibration speed | r/min | 2300 |
| Engine cooling method | / | water cooling |
| Air filter model | / | YKQ1830U |
| Type of air filter | / | dry-type |
| Dimensions of exhaust pipe soundproof chamber (length x width x thickness or diameter x length) | mm | Φ145×475 |
| Quality of exhaust pipe silencing chamber | kg | 4.7 |
| Driver's seat model | / | SMT-CS06-1 |
| Driver's seat manufacturer | / | Weifang Machinery Co., Ltd |
| Seat belt model | / | FS2001 |
| Seat belt manufacturer | / | Yangzhou Fusheng Auto Parts Factory |
| Steering system type | / | fully hydraulic |
| Steering system steering control mechanism | / | steering wheel |
| Steering system steering mechanism type | / | front-wheel steering |
| Number of transmission cases | a | 2 |
| Transmission type | / | Mechanical plane composition |
| Main transmission position | / | In the second box |
| Main transmission shifting mode | / | Mechanical graded gear |
| Shift mode of auxiliary transmission | / | Mechanical graded gear |
| Tire model (front/rear) | / | 6.50-16/11.2-24 |
| Number of tires (front/rear) | / | 2/2 |
| Track material | / | / |
| Track shoe width | mm | / |
| Hydraulic suspension system type | / | Split type |
| Suspension device type | / | Rear three-point suspension |
| Suspension device category | / | Category 2 |
| Model of hydraulic oil pump for working device | / | CBN-F320 |
| Number of hydraulic output groups | / | 1 group |
| Full open pressure of safety valve for working device | MPa | 18±0.5 |
| Number of splines on the power output shaft | / | 6 |
| Standard speed of power output shaft | r/min | 540/720 |
| Optional tire model (front/rear) | / | 5.0-15/9.5-24 |