-
E-mail
3032079623@qq.com
-
Phone
13810166850
-
Address
Tangli Road, Chaoyang District, Beijing
Product Categories
Henan Putian Tongchuang Metrology Co., Ltd
Supplier of steel tape measure calibration device
NegotiableUpdate on 01/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The PTTC-II type steel tape measuring device and length measuring instrument can be used to calibrate the indication errors of conventional measuring tools such as steel tape, steel tape, steel circumference, fiber tape, etc; If equipped with a zero position calibration table, it can compare and verify the zero position deviation of the depth gauge oil dipstick.
Product Details
PTTC-II typeSteel tape measuring device, length measuring instrument
Product Introduction:
PTTC-II typeSteel tape measuring device, length measuring instrument
Can be used to verify the indication error of conventional measuring tools such as steel tape, steel strip, steel circumference, fiber tape, etc; After being equipped with a zero position calibrator, the zero position deviation of the depth gauge oil dipstick can be verified. The application scenarios are very wide and can be used in multiple fields such as engineering surveying, quality inspection, teaching experiments, etc. Whether you are engaged in engineering projects such as construction, roads, bridges, tunnels, quality supervision, metrological certification, or teachers, students, etc., you need to conduct measurement experiments
Technical Specifications:
1. Effective working basic length: 5 meters (can be extended to 50 meters or longer at will)
2. Straightness of guide rail: ≤ 0.3mm/m
3. Static friction force of workbench: ≤ 4N
4. Display accuracy: ± (0.03+0.03L) mm
5. Reading microscope: total magnification 20x, minimum scale value 0.01mm
Basic Configuration：
1. One 5-meter steel tape measure calibration table (with sections every 5m, can be extended to 50m at will)
2. One 5m standard ruler: accuracy of ± (0.03+0.03L) mm
3. Two 5kg heavy hammers: apply tension to the standard ruler and the inspected ruler during operation
4. Two tape clamps,
5. One microscope with 20x reading: accuracy of 0 01mm, Read measurement data during work
6. Small pulley 1: equipped with illumination and auxiliary reading microscope for measurement
7. The standard configuration of the verification table is designed to have an effective working length of 5 meters and can be extended up to 50 meters at will
8. Corresponding to the configuration of the 2015 regulations, the weights have been changed to 2 5kg weights and 1kg weights based on the 2005 versionweight1 piece, 1.6kgweight1 piece. Other: Zero position calibrator.
