Supplier of imported Hedeke ceramic press filter element

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Hedeke ceramic press filter element is a part of the pipeline series for conveying media, usually installed in the inlet filter of the hydraulic system, used to filter out metal particles, pollutants, etc. in the fluid medium, which can protect the normal operation of the equipment. When the fluid enters the filter, its impurities are blocked, and the clean filtrate is discharged from the outlet of the filter.

Product Details

Hedeke ceramic press filter elementImpurities in the water deposit on the stainless steel filter screen, resulting in a pressure difference. By monitoring the pressure difference at the inlet and outlet through a pressure difference switch, when the pressure difference reaches the set value, the electronic controller sends a signal to the hydraulic control valve and drives the motor. After installation, the equipment is debugged by technicians to set the filtration time and cleaning conversion time. The water to be treated enters the body through the inlet, and the filter starts to work normally. When the preset cleaning time is reached, the electronic controller sends signals to the hydraulic control valve and the driving motor, triggering the following actions: the motor drives the brush to rotate, cleaning the filter element, and at the same time, the control valve opens for sewage discharge. The entire cleaning process only lasts for a few tens of seconds. When the cleaning is completed, the control valve is closed, the motor stops rotating, the system returns to its initial state, and the next filtration process begins. The interior of the filter housing is mainly composed of coarse filter screen, fine filter screen, suction pipe, stainless steel brush or stainless steel suction nozzle, sealing ring, anti-corrosion coating, rotating shaft, etc.

When cleaning is needed, simply remove the filter element from the filter, treat it with industrial liquid, and then install it.

Hedeke ceramic press filter elementProduced by HYDAC Technology GmbH in Germany. The company is committed to researching and developing components and devices for fluid filtration technology, hydraulic control technology, electronic measurement technology, as well as manufacturing hydraulic components for products such as filters, accumulators, hydraulic valves, electronic products, pipe clamps, electromagnets, and hydraulic system assemblies. A model of imported hydraulic filter cartridges.

0660R003BN/HC 0660R005BN/HC 0660R010BN/HC 0660R020BN/HC

0660R003BN3HC 0660R005BN3HC 0660R010BN3HC 0660R020BN3HC

0660R003BN4HC 0660R005BN4HC 0660R010BN4HC 0660R020BN4HC

0660R003BN/HC 0660R005BN/HC 0660R010BN/HC 0660R020BN/HC

0660R020P 0660R020W