Street high-pressure cleaning machine function

Industrial high temperature and high pressure cleaning machineFeatures and benefits:

1. Efficiency: In ecological mode, machines operate within a more economical temperature range (60 ° C) using full flow. The burner cycle has been optimized, resulting in reduced fuel consumption compared to full load operation.

2. High efficiency, high-efficiency, and repeatedly tested burner technology -4-pole motor and 3-piston axial flow pump water-cooled motor for high-level performance and durability

3. Safe operation, using a large integral fine pore water filter can reliably prevent dirt particles from entering the high-pressure pump. Adopting an integral exhaust constant temperature controller, if the exhaust temperature exceeds 300 ° C, the drive motor can be turned off. The use of a soft buffering system (SDS) can counteract vibrations and pressure shocks in high-pressure systems.

4. Storage, safe and spacious storage for protecting gears, accessories, and cleaning agents, storage rack for power lines and high-voltage pipes

5. Mobility concept "walking style" design, using large rubber wheels and rotating casters. By using an integral tilt assist device, it is possible to easily navigate through obstacles such as steps and road edges.

Scope of Application

1. Cleaning and maintenance of various motor vehicles, engineering vehicles, construction machinery, and agricultural machinery supporting products, such as washing cars, bulldozers, concrete mixers, tractors, etc. It is an ideal cleaning tool for individuals and small vehicle maintenance units to clean cars and motorcycles.

2. Cleaning the exterior walls, floors, bathhouses, and swimming pools of buildings is particularly effective for doors, windows, floors, toilets, oil stains, and corners that are difficult to clean manually.

3. Disinfection and cleaning of food processing plants, food processing machinery, and kitchens in hotels and restaurants.

4. Ultra high pressure cleaning machines exceeding 500 bar can perform concrete chiseling, and even higher pressure cleaning machines can cut and chisel off various grades of concrete.

Regular maintenance - maintenance every 2 months

Industrial high temperature and high pressure cleaning machineNotes:

When operating a high-pressure cleaning machine: always wear appropriate goggles, gloves, and a mask.

2. Always keep hands and feet out of contact with the cleaning nozzle.

3. Regularly check all electrical connectors.

4. Regularly check all liquids.

5. Regularly check the hose for cracks and leaks.

When the spray gun is not in use, always keep the trigger in a safe locked state.

7. Always use low pressure to work as much as possible, but the pressure should be sufficient to complete the task.

Before disconnecting the hose connection, always release the pressure inside the cleaning machine.

Always drain the water from the hose after each use.

Never point the spray gun at yourself or others.

Do not start the equipment until all hose joints have been checked and locked in place.

Never start the equipment before connecting the supply water and allowing the appropriate amount of water to flow through the spray gun barrel. Then connect the required cleaning nozzle to the spray gun rod.

Caution: Do not leave the high-pressure cleaning machine unattended during operation. Every time you release the trigger, the pump will operate in bypass mode. If a pump has been running in bypass mode for a long time, the high temperature of the circulating water in the pump will shorten its service life and even damage the pump. So, it is necessary to avoid running the equipment in bypass mode for a long time.