Small four axis rolling shutter machine

Small four axis rolling shutter machine

The small four axis rolling shutter machine is currently the most widely used greenhouse rolling shutter machine on the market. The machine has mature technology, suitable price, reliability and safety. It is applied in grass curtain greenhouses of about 60 meters or insulated quilt greenhouses of 80 meters, with a coiling weight of 5 tons.

Installation steps:
1. Pre weld various connecting joints and flanges onto the pipe; Determine the strength and length of the crossbars based on the length of the shed (generally, sheds below 60 meters use 2-inch high-frequency welded pipes with a wall thickness of 3.5; sheds above 60 meters use 2-inch pipes at both ends, except for 30 meters at each end, and 2.5-inch diameter high-frequency welded pipes on both sides of the main unit); Welding roller shaft teeth; If welding double pipes is required for double pipe uprights.
2. Connect the host to the motor.
3. Lower the grass straw on the shed from the middle to both sides, aligning the bottom, and lay a non elastic rope under each straw.
4. Dig a pit and bury ground stakes in the center of the shed, 1.5-2 meters away from the shed.
5. Connect the support rod with a flexible knot and a pivot, stand it up, and connect it to the ground pile.
6. Connect the vertical pole to the host, and lay the horizontal pole for backup connection.
7. Connect the machine rod or scroll from the middle to both sides.
8. Fix the rope under the canopy onto the shaft teeth.
9. Connect the reverse switch and power supply.
10. Test the machine and place some soft material on the slow rolling area to adjust the rolling speed until it rolls in a straight line.
Instructions for using the small four axis rolling shutter machine:
The initial installation of the small four axis rolling shutter machine is completed by professional installers, making it very convenient for users to use.
When rolling up the roller blind from bottom to top, turn the switch to the "smooth" position. When the roller blind reaches the predetermined position, turn the switch back to the "off" position.
When placing the curtain from top to bottom, turn the switch to the "inverted" position. When placing the curtain to the predetermined position, turn the switch back to the "off" position.
In case of power outage, the hand crank can be inserted into the hand crank socket and manually shaken. Shake the roller blind clockwise to lift it up, and counterclockwise to lower it down.