Selection of stainless steel submersible mixer

The manufacturer has a complete range of submersible agitator models and stainless steel biological flow machines

Diving mixermotor housing

The motor housing of the mixer is made of high-quality stainless steel, with a thickness sufficient to withstand any load, and its surface is machined flat and smooth.

Diving mixerimpeller

The impeller is made of stainless steel and has undergone dynamic balance testing. There is a locking device installed between the impeller and the shaft to prevent loosening during rotation. The blades are designed as three pieces, with self-cleaning and vibration free functions.

The selection of stainless steel with a guide cover for a stamping sewage mixer is a complex task, and the correctness of the selection directly affects the normal use of the equipment. As a principle of selection, it is necessary to ensure that the mixer can fully perform its mixing function in the appropriate volume, which can generally be determined by the flow rate.

According to the different process requirements of sewage treatment plants, the ideal flow rate of the stamping sewage mixer should be ensured to be within0.15~0.3m/SbetweenIf it is below 0.15m/SThe flow rate cannot achieve the effect of pushing and stirring, exceeding 0.3m/SThe flow rate will affect the process effect and cause waste. So before selecting, first determine the location where the submersible mixer will be used, such as sewage tanks, sludge tanks, and biochemical tanks; Next are the parameters of the medium, such as suspended solids content, viscosity, temperaturePH value; Also, the shape and depth of the pool.

The manufacturer has a complete range of submersible agitator models and stainless steel biological flow machines

NanjingSapphire Environmental ProtectionMain considerations for selecting a submersible mixer:

The selection of a high consistency sewage treatment mixer is a complex task, and the correctness of the selection directly affects the normal use of the equipment. As a principle of selection, the mixer should fully exert its mixing function within the verified volume, which can generally be determined by the flow rate. According to the different process requirements of sewage treatment plants, the recommended flow rate of the mixer should be ensured to be within0.15~0.3m/SBetween, if lower than0.15m/SThe flow rate cannot achieve the effect of a push flow mixer, exceeding0.3m/SThe flow rate will affect the process effect and cause waste. So before selecting, first determine the location where the submersible mixer will be used, such as sludge tanks, sewage tanks, and biochemical tanks; Next are the parameters of the medium, such as suspended solids content, viscosity, temperaturePH value; Also, the characteristics and depth of the pool.

The required matching power for the high consistency sewage treatment mixer is determined by the volume, density of the mixed liquid, and depth of the mixed liquid. Depending on the specific situation, one or more mixers can be used.