-
E-mail
568491301@qq.com
-
Phone
15567372888
-
Address
Mingcheng Town Economic Development Zone, Panshi City, Jilin Province
Product Categories
Jilin Shunkun Electric Vehicle Co., Ltd
Scrap iron 4YZP-2 tracked corn harvester
NegotiableUpdate on 05/26
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Scrap iron 4YZP-2 tracked corn harvester
Product Details
Product Introduction:
This machine can complete mature corn picking, peeling, straw returning and other operations in one go. It adopts a track design to reduce the center of gravity of the vehicle and increase stability. The design of the transmission shaft eliminates the risk of chain breakage; Large capacity hydraulic flip ear box, practical and convenient; Domestic famous brand engine matching, strong power; Compact structure, convenient and flexible, reliable operation, high efficiency, suitable for various terrains.
The all-new tracked corn harvester has undergone a complete redesign based on the original model
1. Equipped with a high-power slag discharge fan, the harvest is clean and tidy;
2. Increase grain storage and reduce the frequency of grain unloading;
3. Easy to operate, hydraulic steering, one lever control;
4. Adding air to the recycling bin and improving the cleanliness of grains;
5. Lowering the height of the cutting platform allows for the harvesting of low straw corn;
6. Significant improvements have been made to the transmission system, resulting in noise reduction and reduced failure rates in the gearbox. The entire vehicle is now without chains;
7. Fully enclosed support wheels are sturdy and durable.
65 horsepower harvester configuration list
| Harvester model | 4YZP-2 | ||
| Dimensions | long | mm | 5200 |
| wide | mm | 1650 | |
| tall | mm | 2750 | |
| quality | kg | 3000 (full fuel) | |
| engine | model | 4B2-65U32 | |
| type | Single row four cylinder, water-cooled, turbocharged diesel engine | ||
| rated power | KW | 48 | |
| rated speed | r/min | 2400 | |
| Fuel grade | 0 # diesel | ||
| Fuel tank capacity | L | 88 | |
| Preheating method | Single point preheating | ||
| Air intake filtration method | 2nd level filtration | Air filter+secondary oil filter | |
| Start mode | Electric starter | ||
| Walking part | Track model | 280X90X48 high tooth | |
| track pitch | mm | 90 | |
| Transmission | S96 synchronous type | Mechanical transmission | |
| Variable speed mode | Manual mechanical meshing sleeve variable speed | ||
| Variable speed range | High speed, low speed, forward 6th gear, backward 2nd gear | ||
| Speed | Low speed m/s | 0-1.666 | |
| Medium speed m/s | 0-1.73 | ||
| High speed m/s | 0-2.78 | ||
| Steering method | Hydraulic mode of handle combination valve | ||
| Cutting table section | Cutting table transmission mode | Transmission shaft and gearbox | |
| width of cloth | mm | 1400 | |
| Anti entanglement grass cleaning knife | a flat | 4 | |
| Cutting table lifting method | Hydraulic mode of handle combination valve | ||
| Harvesting method | Spiral pull stem rolling | ||
| Harvesting control method | Handle hydraulic mode | ||
| Crushing device | Stem crushing method | Double action knife rotary cutting with middle pounding knife | |
| Transmission mode | C-type V-belt with automatic tensioning mechanism | ||
| Spindle speed | r/min | 2353 | |
| Quantity of fixed knives | a flat | ||
| Number of knives used | a flat | 12 | |
| Number of Hammer Knives | group | 12 | |
| Straw returning method | Double roller cutter with opposing style | Double roller milling for crushing and returning to the field | |
| Lifting device | Lifting method | Combination of two sections of conveyor belt | |
| Slag discharge method | Add a crushing slag discharge fan to the discharge port of the conveyor belt | ||
| Transmission mode | 10A double chain transmission with automatic chain tensioning mechanism | ||
| Safety device | |||
| Peeling machine section | Number of peeling rollers | 8 rolls+slag discharge | |
| Transmission mode | Star wheel drive | Gear combination transmission | |
| Peeling roller transmission | Transmission shaft, gearbox | ||
| Droplet recycling | Recycling bin residual air cleaning slag, hydraulic winch discharge | ||
| Other devices | Alarm device | Reverse voice alarm | |
| automatic control | Electronic throttle cruise control | ||
| Safety device | Overloading clutch at two locations on the cutting platform | ||
| Work efficiency | hm2/H (mu/hour) | 3-4 acres | |
100 horsepower harvester configuration list
| Harvester model | 4YZP-2 | ||
| Dimensions | long | mm | 5200 |
| wide | mm | 1650 | |
| tall | mm | 2750 | |
| quality | Kg | 3000 (full fuel) | |
| engine | model | 4C6-100U32 | |
| type | Single row four cylinder, water-cooled, turbocharged diesel engine | ||
| rated power | KW | 75 | |
| rated speed | r/min | 2400 | |
| Fuel grade | 0 # diesel | ||
| Fuel tank capacity | L | 88 | |
| Preheating method | Single point preheating | ||
| Air intake filtration method | 2nd level filtration | Air filter+secondary oil filter | |
| Start mode | Electric starter | ||
| Walking part | Track model | 280X90X48 high tooth | |
| track pitch | mm | 90 | |
| Transmission | YZ100 or YD100 hydraulic type | hydraulic transmission | |
| Variable speed mode | Hydraulic continuously variable transmission | HST50-56 | |
| Variable speed range | Unlimited transmission+hydraulic gearbox with high, medium, and low gears | ||
| Speed | Low speed m/s | 0-1.73 | |
| Medium speed m/s | 0-2.1 | ||
| High speed m/s | 0-3.0 | ||
| Steering method | Hydraulic mode of handle combination valve | ||
| Cutting table section | Cutting table transmission mode | Transmission shaft and gearbox | |
| width of cloth | mm | 1400 | |
| Anti entanglement grass cleaning knife | a flat | 4 | |
| Cutting table lifting method | Hydraulic mode of handle combination valve | ||
| Harvesting method | Spiral pull stem rolling | ||
| Harvesting control method | Handle hydraulic mode | ||
| Crushing device | Stem crushing method | Double action knife rotary cutting with middle pounding knife | |
| Transmission mode | C-type V-belt tensioning mechanism | ||
| Spindle speed | r/min | 2353 | |
| Quantity of fixed knives | a flat | 3 | |
| Number of knives used | a flat | 12 | |
| Number of Hammer Knives | group | 12 | |
| Straw returning method | Double roller cutter with opposing style | Double roller milling for crushing and returning to the field | |
| Lifting device | Lifting method | Combination of two sections of conveyor belt | |
| Slag discharge method | Add a slag discharge fan to the discharge outlet of the conveyor belt | ||
| Transmission mode | 10A double chain transmission with automatic chain tensioning mechanism | ||
| Safety device | |||
| Peeling machine section | Number of peeling rollers | 8 rolls+slag discharge | |
| Transmission mode | Star wheel drive | Gear combination transmission | |
| Peeling roller transmission | Transmission shaft and gearbox | ||
| Droplet recycling | Recycling bin with residual air cleaning slag and hydraulic winch discharge | ||
| Other devices | Alarm device | Reverse voice alarm | |
| automatic control | Electronic throttle cruise control | ||
| Safety device | Overloading clutch of the cutting platform | ||
| Work efficiency | hm2/H (mu/hour) | 4-6 acres | |
Similar Product Recommend
