Professional production of wheat huller, wheat husk huller, and residue remover

The professional production of wheat hulling machine, wheat glume hulling machine, and residue removal machine is mainly based on flexible rolling. By controlling the rolling force between materials through reasonable rotation speed and material inventory in the cylinder, the shell, awns, wings, hairs, thorns, tips, etc. attached to the materials are cleaned up.

After the material is fed, the feeding amount is controlled by the feeding hopper insert plate. The adjustment of the discharge port plug can control the material storage inside the barrel. Excessive material storage can cause motor overload, while insufficient material storage can result in insufficient kneading force between materials, affecting the processing effect and reducing the shelling rate. Therefore, reasonable material storage should be maintained inside the barrel according to the characteristics of the materials.

Professional production of wheat huller, wheat husk huller, and residue removerProduct advantages:

1. Service life: The cylinder material is made of 8mm seamless pipe, which is wear-resistant and has a long service life;

2. Damage rate: Flexible board cutting reduces damage rate;

3. Environmentally friendly use: The cylinder can be equipped with dust removal ducts and fans to remove shell dust, making it more environmentally friendly;

4. Convenient cleaning: The bottom of the cylinder is equipped with a cleaning door for quick cleaning, preventing mechanical mixing;

5. Optional feeding hoist, integrated structure runs smoothly;

6. Compact structure: equipped with a fixed adjustment screw and a walking wheel, the equipment runs smoothly and is easy to move.

Professional production of wheat huller, wheat husk huller, and residue removerScope of application:

This model is suitable for seed hulling processing of wheat, barley, and other crops, as well as for hulling processing of various varieties of sorghum.

1. Before use, we need to conduct a comprehensive inspection of the machine, focusing on checking the rotating parts, whether the blades and gears are flexible and normal, whether the lubricating oil on the bearings is sufficient, and so on. During operation, the machine should be placed steadily on the ground to ensure safety.

2. Before use, it is important to check the power switch to avoid any unexpected situations.

3. When placing wheat, make sure it is not mixed with any other objects or iron filings or stones.

4. After using the machine for a period of time, it should be cleaned and the blades should be cleaned thoroughly. The lubricating oil at the bearings should be applied sufficiently, and the dust should be cleaned thoroughly. The machine should be stored in a dry or sunny place when not in use, and the belt should be removed for storage.

Before homework, check whether the connecting screws of each part are tightened, whether the transmission parts rotate flexibly, whether there are any abnormal sounds, and whether the tension of the transmission tape is appropriate.

6. When changing varieties during the homework process, the remaining seeds in the machine should be cleaned up, and the machine should continue to operate for 5-10 minutes. At the same time, the front and rear air volume adjustment handles should be turned on and off several times to eliminate the remaining seeds and impurities deposited in the front, middle, and rear chambers.

7. If it is necessary to work outdoors due to limited conditions, the machine should be parked in a sheltered place and placed downwind to reduce the impact of wind on the selection effect. When the wind speed exceeds level 3, consideration should be given to installing windproof barriers.