Production of square tube top bending machine

Top bending machineSeries hydraulic double cylinder top bending machine: large: processing of large curvature bending and top bending of various profiles such as H/I-beams, channel steels, round pipes, track steels, etc.: separate control station.

Suitable for the arc forming processing of large profiles, the hydraulic system controls the forward and backward movement of large profiles or pipes, and various types of profiles to bend them into shape. By adjusting the curvature of the template, the curvature of the bent workpiece can be controlled. It is particularly suitable for curved steel structures in buildings, tunnel supports, roof beams, subway engineering, curtain walls, ceilings, production line tracks, various oversized profiles, large curvature bending shapes, and other industries. *The hydraulic control station provides thrust for the hydraulic cylinder when the workpiece is bent, and the workpiece is formed by adjusting the curvature template. The dual cylinder is the workpiece clamping cylinder, and the curvature of the workpiece is bent by the forward and backward movement of the cylinder.

Operation Method:

1. Connect the power and start the device. Check if the hydraulic station motor is rotating in the forward direction. If the motor is in the reverse direction, immediately turn off the power and reverse for a long timeIt may cause damage to the oil pump, and at the same time, check if all parts are functioning properly.

2. When bending the workpiece, first adjust it to the center position of the oil cylinder. If it is necessary to add a cushion block, ensure that the cushion block is solid and firm to prevent the workpiece from slipping and getting injured when clampedPeople. After adjustment, first clamp the workpiece for top bending operation.

3. When bending the workpiece, it is necessary to adopt segmented movement for bending. If necessary, auxiliary fixtures should be used. Only then can the top bending effect be achieved. Need to increase if necessaryFill items to meet workpiece requirements.

4. The curvature of the workpiece is determined based on operational experience

(First use the curved board to lean against the equipment template. Adjust to the position in sequence)