Production of high-pressure vertical multi-stage pump

CDLF lightweight stainless steel vertical multi-stage centrifugal pumpProduct features:

1. By adopting hydraulic models and manufacturing processes, the performance and service life of the pump are greatly improved.

2. Due to the use of mechanical seals made of hard alloy and fluororubber, the reliability of pump operation and the temperature of the conveying medium can be improved.

3. The overcurrent part of the multi-stage stainless steel stamping pump is made of stainless steel plate stamping and welding, making the pump suitable for mildly corrosive media.

4. The overall structure is compact, small in size, light in weight, low in noise, energy-saving, and easy to maintain.

5. The inlet and outlet of the pump are located on the same horizontal line as the pump seat and can be directly used in the pipeline.

6. Using standard motors, users can easily equip motors according to their needs.

7. Intelligent protectors can be equipped according to user needs to effectively protect pumps from dry running, phase loss, overload, etc.

CDLF lightweight stainless steel vertical multi-stage centrifugal pumpThe motor shaft is directly connected to the pump shaft through the pump head using a coupling, and the pressure resistant cylinder and overcurrent components are fixed between the pump head and the inlet and outlet sections with tension rod bolts. The pump inlet and outlet are on the same straight line at the bottom of the pump; This pump can be equipped with an intelligent protector as needed to effectively protect against dry running, phase loss, overload, and other issues.

The impeller, pump casing, and main accessories inside the water pump are made of stainless steel stamping, and the flow channel is particularly smooth. The bearing shell and shaft are made of hard alloy, which has a long service life and avoids secondary pollution. The shaft seal adopts wear-resistant mechanical seal, with no leakage. The motor adopts Y2 lead shell, imported bearings, and insulation grade F. The pump runs smoothly, with low noise, reliable overall quality, beautiful appearance, small size, light weight, and easy transportation. It is a green, environmentally friendly, and energy-saving water pump.

To minimize the potential noise generated by the pump, it is recommended to install anti vibration fasteners on both sides of the pump and between the foundation and the pump body. If necessary, when cleaning, repairing, or replacing the pump, isolation valves should be installed on both sides of the pump to prevent system drainage. The installation pipeline of multi-stage centrifugal pumps should avoid air blockage, especially on the suction side of the pump. The pipe should be installed in such a way that any stretching caused by temperature changes will not affect the pump. If the pump is installed on a long pipe, it should be properly supported both in front and behind as shown.