Production of car headlight rain test chamber

Car headlight rain test chamberPurpose:

The main function of this device is to test the physical and other related properties of electronic and electrical products, lamps, cabinets, electrical components, automobiles, motorcycles and their parts under simulated rainy weather conditions. After testing, the performance of the product is evaluated through calibration to determine whether it meets the requirements, in order to facilitate the design, improvement, calibration, and factory inspection of the product.

Car headlight rain test chamberFeatures:

1. Suitable for conducting IPX3 and IPX34 tests on products.

The equipment casing and turntable are all made of SUS304 # stainless steel plate to ensure long-term use without rusting.

3. Model structure: Adopting a double column structure, easy installation, and smooth rotation of the swing tube.

The bottom of the device chassis is equipped with casters with adjustable foot cups, making it easy to move and adjust the machine's level.

There is a water tank installed inside the 5 computer cases. The water tank is equipped with a water level float ball valve to automatically control the water inlet, and has high and low water level alarm detection to effectively prevent the water pump from being damaged due to water shortage.

6. Swing tube drive: Using imported Panasonic servo motors (which have the advantages of low noise, precise speed and angle). Rotary table drive: using domestically produced high-quality adjustable speed motors (suitable for conducting sample power testing to prevent winding).

The power on/off time of the 7 samples can be controlled by a programmable function: power off from 0-999 min - power on from 0-999 min - power off from 0-999 min (suitable for testing samples when power on/off is required).

8 Touch control function: A. IPX3 test, conducted according to the IPX3 conditions in the standard terms; B. IPX4 test shall be conducted according to the IPX4 conditions specified in the standard terms; C、 Custom testing, conducted according to user requirements, can set testing time, rain angle, pipe swinging speed, and turntable speed.

The testing time can be set from 0-999 minutes (adjustable).

10. Taiwan, China based VILON 7-inch touch screen+Panasonic PLC are used. All electrical components are of Schneider, Omron and other imported brands. The wiring process meets the requirements of national standards. The electric board layout is reasonable, the wiring is firm and the signs are clear.

11 filtration measures: The equipment comes standard with high-precision filters, which can effectively filter impurities in tap water; The filter element can be replaced regularly.

Equipment parameters:

Model UN-225-3.4EIP

1. Swing tube size (mm) R800 (R600, R400, R200 swing tubes can be added)

2 external dimensions (mm) L2400 * D1800 * H2000

3 flow rate (L/mm) 0-4L/min

4. Test turntable size (mm) Φ 600 (can be equipped with Φ 400, Φ 200 tables)

5. Adjustable height range of turntable 950-1550mm

6 swing tube inner diameter (mm) 15

7 Spray aperture size (mm) 0.4 mm

8 swing tube angles of 120o (IPX3), 350o (IPX4) or custom settings

9 swing tube speed 120 ° back and forth 4S, 360 ° back and forth 12S (precise control) or custom setting

10 swing tube material SUS304 stainless steel tube

11 Test turntable speed 1-5r/min (precise adjustable)

12 Protection devices for leakage, water interruption, and short circuit

Equipment standard:

comply with IEC60529:2001《Degrees of protection provided by enclosures(IP Code)》、GB4208-2008《 Clause 14.2.3 and 14.2.4 of the "Protection Class of Enclosures (IP Code)" and Figure 4, as well as Clause 9.2.4 and 9.2.5 of GB7000.1 "Luminaires Part: General Requirements and Tests" and Figure 9.4 requirements