Production of biopharmaceutical purified water equipment

Biopharmaceutical purified water equipment

Product Details

Guangzhou JiehanWe are a production enterprise specializing in high-quality purified water equipment, integrating production, sales, installation, and maintenance to provide high-quality purified water equipment for many enterprises in need.

The core technology of biopharmaceutical purified water equipment adopts new processes such as single-stage or two-stage reverse osmosis and EDI, and designs a set of high-quality pure water treatment processes with targeted design to meet the water requirements for the production of purified or distilled water for pharmaceutical factories, hospitals, and laboratory diagnostic reagents. The entire system is composed of SUS304L or SUS316L all stainless steel materials, and must be equipped with ultraviolet and ozone sterilization devices or pasteurization before use.

Guangzhou Jiehan Biopharmaceutical Purified Water Equipment

Purified water used in the pharmaceutical industry, also known as deionized water (or desalinated water), usually refers to a type of process water that is prepared using methods such as reverse osmosis and EDI, and is made from urban tap water or surface water as raw water without any additives. The national water requirements for the pharmaceutical industry are very strict, so the water produced by purified water equipment used in the pharmaceutical industry must comply with the Chinese Pharmacopoeia (2015 edition). The Guangzhou Jiehan purified water system is designed and manufactured in accordance with GMP requirements, and the purified water process is designed according to the source water quality. At the same time, we provide customers with complete GMP system verification services. The system adopts automatic control mode, which is stable, reliable, exquisite and beautiful, making it a good choice for purified water equipment in pharmaceutical production and the pharmaceutical industry. The equipment produced by Guangzhou Jiehan has been professionally designed and produced by the manufacturer to provide long-term and stable purified water, which can meet the requirements of pharmaceutical factories, hospitals for purified water production, and infusion production.The Guangzhou Jiehan purified water system can be used for pharmaceutical water, pharmaceutical preparations, in vitro diagnostic reagents, blood purification, hemodialysis, biochemical product water, sterile water, oral liquid water, disinfection rooms, hospital supply rooms, etc.

The biopharmaceutical purified water equipment produced by Guangzhou Jiehan adopts Dow RO membrane filtration to effectively remove impurities such as heavy metals, suspended solids, colloids, organic matter, bacteria, viruses, etc. from raw water.

Guangzhou Jiehan Biopharmaceutical Purified Water Equipment Service Content
This includes the production of purified water equipment, process design, system manufacturing, on-site installation, system debugging, equipment warranty, and after-sales service.

Complies with the GMP standards of the 2015 edition of the pharmacopoeia
Meets the purified water standard of "Water for In Vitro Diagnostic Reagents" (YYT-1244-2014)

Standard Specification for Guangzhou Jiehan Biopharmaceutical Purified Water Equipment

1Regulations
(1) Implementation Regulations of the Drug Administration Law of the People's Republic of China
(2) Pharmacopoeia of the People's Republic of China (2015 edition)
(3) Good Manufacturing Practice (GMP) (2010 edition)
(4) In vitro diagnostic reagent water (YYT-1244-2014)
2Reference standards
(1) JB/T20093-2007 Pharmaceutical Machinery Industry Standard
(2) GB 9706.1-1995 General Safety Requirements for Electrical Equipment *
(3) JGJ71-90 Code for Construction and Acceptance of Cleanrooms
(4) YYT-1244-2014_Standard for In Vitro Diagnostic Reagent Water
(5) JB/T 2932-1999 Technical Conditions for Water Treatment Equipment
(6) GB150 Steel Pressure Vessels
(7) NB/T47003.1-2009 Steel Welded Atmospheric Pressure Vessels
(8) GB50236-98 Code for Construction and Acceptance of Field Equipment and Industrial Pipeline Welding Engineering
(9) GB/T 5226.1-96 General Requirements for Electrical Safety of Mechanical Products
(10) GB-52261-2002 Mechanical Safety - Mechanical Electrical Equipment - Part: General Technical Conditions

Design Parameters of Guangzhou Jiehan Biopharmaceutical Purified Water Equipment

1Raw water requirements: meet the hygiene standards for drinking water (pressure 0.2-0.5MPa); Conductivity ≤ 500 μ s/cm; Total hardness<300ppm<>
2Power supply requirements: AC380/220V 50HZ, three-phase five wire, reliable grounding
3Environmental temperature: 5-40 ℃; Atmospheric pressure: 700Kpa-1060Kpa; Relative humidity: ≤ 80%
4Desalination rate of reverse osmosis system: ≥ 98%
5Maximum operating pressure: ≤ 1.5Mpa
6Equipment production and operation mode: 24-hour production per day;
7Installation site requirements: The ground should be flat and equipped with a waterproof layer, and there should be a smooth drainage floor drain
8This system avoids operating in environments with direct sunlight and strong magnetic field interference
9Other: Users provide equipment site, water source, power supply, and equipment drainage ditch

Characteristics of Process Design for Guangzhou Jiehan Biopharmaceutical Purified Water Equipment

1The purified water system adopts fully automatic control, with high stability and simple and convenient operation;
2By using a two-stage reverse osmosis process, the desalination rate is high, the effluent quality is stable, and the performance is reliable, ensuring the stable operation of the system to the greatest extent possible.
3Adopting PLC combined with human-machine interface for fully automatic control, touch screen one click start, simple and convenient operation, clear picture, exquisite and beautiful appearance.
4Set up water quality correction function, effectively use water quality warning function, and there will never be an emergency situation.
5Equipped with a purified water delivery and supply system, the water production system is controlled separately from the water supply system. In case of replacement of consumables, there is no need to stop the water supply or production.
6、 RO water production and flushing time can be set, and during peak water usage periods, the water production time can be adjusted to ensure stable water usage at the water point.
7The pre-treatment system, water production system, and water use system in the purified water system are respectively equipped with circulating water circuits. The qualified water and unqualified water are discharged to the previous section in each water quality section to ensure stable and safe water quality.

Process Flow of Guangzhou Jiehan Biopharmaceutical Purified Water Equipment

(1)Preprocessing+primary reverse osmosis+secondary reverse osmosis
(2)Preprocessing+primary reverse osmosis+EDI equipment

(3)Preprocessing+primary reverse osmosis+secondary reverse osmosis+EDI equipment

Guangzhou Jiehan Biopharmaceutical Purified Water Equipment Service Process
1. Communicate with customer service or business personnelcommunicationConduct one-on-one detailed communication;
2Engineers create plans and quotations based on customer needs;
3Engineers communicate plans with clients and modify them;
4Determine the plan and quotation, sign the contract, and proceed with production;
5After installation and debugging are qualified, it can be accepted and used;
6365 days of attentive after-sales maintenance.

Guangzhou Jiehan Biopharmaceutical Purified Water Equipment Product Service

1After sales service

(1) Full process documentation from design to production, operation, and after-sales service, with free long-term storage.
(2) Lifetime tracking of equipment operation status, SMS and phone reminders for customers to replace consumables, free technical analysis services for equipment operation records, and judgment of system operation status to prevent problems before they occur.

(3) Provide a solution for equipment malfunction within 30 minutes and conduct on-site repairs within 24 hours.

2Product training

Train at least 1-2 equipment operation and management personnel.

Training content: Basic theory, equipment construction, equipment operation, CIP cleaning and disinfection, equipment maintenance, instrument calibration, equipment troubleshooting, on-site practical operation, etc.

3Quality Commitment

Ensure the safe and stable operation of the equipment, with lifelong maintenance.

Biopharmaceutical purified water equipment Biopharmaceutical purified water equipment Biopharmaceutical purified water equipment