M300S evaporative light scattering detector supplier

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Sofida evaporative light detector for chromatography achieves split flow control by controlling the temperature of the atomization zone, so split flow settings can be obtained for applications with high boiling point, low boiling point, or gradient separation.

Product Details

Chromatography - Sofida Evaporative Luminescence Detector

Main Features

l applicationSofTAThermal diversion technology, controlling evaporation.

l Capable of cooling operationELSDLow temperature operation can be achieved for both organic and inorganic mobile phases.

l Using Teflon sprayELSD.

l Temperature control in the atomization zone to achieve diversion.

l Bright and easy to observe Vacuum Fluorescent Display

l Can store 10 different detection methods.

Evaporative light scattering detectortechnical indicators：

nozzle	TeflonNozzle, anti clogging, anti wear, anti corrosion
Liquid mist diversion mode	By controlling the temperature in the atomization zone to achieve flow control, flow settings can be obtained for applications with high boiling point, low boiling point, or gradient separation.
Temperature in the atomization zone	10ºC–70ºC
Drift tube temperature	Room temperature -120ºC
light source	Near infrared laser (650nm), less than 5mW, meets FCC eye safety standards.
detection element	Built in high-power amplifier, fully sealed large-area silicon photodiode
sensitivity	100pg,Glucopyranoside, Micro-HPLC(Microchromatography)
peak width	3Seconds (10% peak height, 2ul direct injection)
Dynamic range under given gain	Normal gain: 3 orders of magnitude Low gain: 3 orders of magnitude Dynamic range expansion: 4-4.5 orders of magnitude
Liquid phase flow rate	Up to 5mL/min
Gas phase requirements	50psiNitrogen or other inert gases
Gas consumption	≤2.5L/min
Gas volume control	Built in pressure regulator valve, users do not need to adjust the intake pressure or flow rate. Built in overvoltage protection. Built in intake valve, the intake valve can automatically delay closing to prevent the gas tank from being emptied due to forgetting to close it after use.
Fluid circuit materials	TeflonStainless steel, alumina, glass (lens)
user interface	4Multi functional buttons
Instrument display and control	Detecting signals, temperature, pressure, filtering constants, real-time self-test information
buzzer control	Intelligent instrument status prompt, error alarm.
signal output	Fixed: 10mV, 5V Optional: 0-5V
computer interface	RS232
Rear panel interface	Intake valve control, reset control, instrument status output, operation error output
power supply	120V/240V, 60/50Hz, 600W
weight	15kg
size	25W×45D×29H（cm）