JBJ paddle mixer

Mixing tank mixerThe type is suitable for mixing tanks, reaction tanks, and mixing various chemicals in water supply and drainage engineering, as well as stirring the reaction process.

Product Name: JBJ Slurry Blender

Category: Water treatment mixer

feature：

1. Simple construction, reliable operation, no blockage, and easy maintenance;

2. It can achieve a certain mixing intensity within the required mixing time, meet the requirements of fast, uniform, and sufficient mixing speed, and has low head loss. It can also adapt to changes in water volume and is suitable for water plants with various water volumes.

Mixing shaft material: carbon steel, carbon steel lined with fiberglass, carbon steel lined with rubber, carbon steel lined with plastic, 201 stainless steel, 304 stainless steel, 316L stainless steel

Product Introduction:
The slurry mixer is currently an ideal model both domestically and internationally, with advantages such as high automation, good mixing quality, high efficiency, low energy consumption, low noise, easy operation, fast discharge speed, long service life of lining plates and blades, and convenient maintenance. The slurry mixer is suitable for mixing plastic, dry hard, lightweight aggregate concrete and various mortars and mortars.
Non standard, various specifications of mechanical mixers can be manufactured according to user conditions such as water quality, water temperature, corrosiveness, viscosity, etc.
Among them, there are various options for reducers, including domestic, imported, or cycloidal pin and gear reducers;
The mixing rod and mixing blade are made of various materials such as stainless steel, carbon steel anti-corrosion, and plastic;
There are multiple options for blade shapes, including two-page, three leaf, single-layer, double-layer, and frame style.

Model representation method:

Main technical parameters and installation dimensions:

Construction and working process:

The JBJ type paddle mixer, as shown in the figure, consists of a mixing shaft, mixing blades, a machine base, and a driving device.

When the raw water and coagulant or coagulant aid liquid flow through the mixing tank, flow circulation is generated under the discharge of the mixer, allowing the coagulant to quickly and thoroughly mix with water to meet the requirements of the coagulation process.

Electrical Control

Control box can be manually configured with PLC interface or configured according to user requirements.

Mixing tank mixer

Product Introduction:

blenderIt is currently an ideal model with high automation, good mixing quality, high efficiency, low energy consumption, low noise, easy operation, fast unloading speed, long service life of lining plates and blades, and convenient maintenance. The slurry mixer is suitable for mixing plastic, dry hard, lightweight aggregate concrete and various mortars and mortars.

Features:

1. Widely applicable, it can stir various liquids with different concentrations, media, and suspended solids.

2. Stable operation, minimal vibration, and low noise.

3. Corrosion resistant, therefore it can stir various liquids with pH 3-10.

4. Simple construction, reliable operation, no blockage, and easy maintenance.

5It can meet the requirements of flocculation laws, making each section of the flocculation process have different stirring intensities, and can adapt to changes in water volume and temperature. Small head loss, simple pool structure, and convenient combination of external capacity.

After setting the stepless speed regulation, the stirring intensity can be adjusted according to changes in water volume, raw water turbidity, and dosage, achieving satisfactory flocculation effect and saving the amount of chemicals used.

Construction and working process:

The JBJ paddle mixer, as shown in the figure, consists of a mixing shaft, mixing blades, a machine base, and a driving device.

When the raw water and coagulant or coagulant aid liquid flow through the mixing tank, flow circulation is generated under the discharge of the mixer, allowing the coagulant to mix quickly and thoroughly with water, meeting the requirements of the coagulation process.
Non standard, various specifications of mechanical mixers can be manufactured according to user conditions such as water quality, water temperature, corrosiveness, viscosity, etc.
Among them, there are various options for reducers, including domestic, imported, or cycloidal pin and gear reducers;
The mixing rod and mixing blade are made of various materials such as stainless steel, carbon steel anti-corrosion, and plastic;
There are multiple options for blade shapes, including two-page, three leaf, single-layer, double-layer, and frame style.