Imported ROLS speed sensor from the United States

NegotiableUpdate on 01/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The housing of the MONARCH ROLS-W laser speed sensor in the United States is made of threaded stainless steel, which is easy to fix and uses a red visible laser light source. After collecting valid signals, the green LED light at the tail lights up, indicating that the measurement is effective, with a large range and a wide application range. The measurement distance can reach 7.6 meters. Suitable for measuring distances in the vast majority of situations. ROLS-W remote optical laser speed sensor with 8-foot cable, 3 tin plated leads, mounting bracket with locking nut, and 12 inch T-5 reflective tape

Product Details

MONARCH ROLS laser speed sensor from the United States

A versatile laser speed sensor, including an 8-foot cable, a mounting bracket with a locking nut, and a 12 inch T-5 reflective tape. ROLS-P-25 and ROLS24-W-25 include a 25 foot cable.

1-250000 revolutions per minute! ROLS has a wide range of applications and can work over long distances (up to 25 feet). ROLS-W (tin plated wire termination) and ROLS-P (1/8 inch telephone plug termination) are threaded stainless steel remote optical sensors with visible red laser light sources. All these sensors have an On Target green LED indicator light.

Remote optical laserspeedSensors - Five ROLS models to choose from, including ROLS and ROLS24!

Model ROLS-P: Remote Optical LaserspeedSensor with 8-foot cable, 1/8-inch [3.5mm] telephone plug connector, mounting bracket with locking nut, and 12 inch T-5 reflective tape

Model ROLS-P-25: Remote Optical LaserspeedSensor with 25 foot cable, 1/8 inch [3.5mm] phone plug connector, mounting bracket with locking nut, and 12 inch T-5 reflective tape

Model ROLS-W: Remote Optical LaserspeedSensor with 8-foot cable, 3 tin plated leads, mounting bracket with locking nut, and 12 inch T-5 reflective tape

Model ROLS24-W: Remote Optical LaserspeedSensor with 24V DC input power supply, 8-foot cable, 3 tin plated leads, mounting bracket with locking nut, and 12 inch T-5 reflective tape

Model ROLS24-W-25: Remote Optical LaserspeedSensor with 24V DC input power supply, 25 foot cable, 3 tin plated leads, mounting bracket with locking nut, and 12 inch T-5 reflective tape

ROLS and ROLS24 Remote Optical LaserspeedSensor specifications *:

specification	specification value
speed range	1-250000 revolutions per minute
lighting	Visible red light laser, Class 2
Laser classification	Class 2 (according to IEC 60825-1:2014) This product complies with IEC60825-1 3rd edition and 21 CFR 1040.10 and 1040.11, except for deviations according to Laser Notification No. 50 of June 2007.
laser output	1 mW
Pulse duration	continuous
laser wavelength	650nm (visible red)
Beam divergence	< 18 mrad
Beam diameter	4 x 7 mm at 2 m (typical value)
Lifetime of semiconductor laser tube	8000 working hours MTBF (1-year warranty)
target indicator	Green LED on the wire end cover
scope of work	The farthest distance is 7.6 meters and 25 feet, offset by 60 degrees from the target
Power requirements	ROLS：3.3 – 15 Vdc， 0.4W ROLS24-W：24 Vdc ±10%， 0.4W Attention: Provides 24 Vdc power input option, please refer to the ordering information.
Output - Standard	ROLS: collector open circuit, with an internal pull-up resistor for power supply voltage; When the target is present, the pulse is positive; Output voltage=power supply voltage ROLS24-W: collector open circuit, with internal pull-up resistor (5600 ohms), power supply voltage is negative~5V; present Positive pulse optional output at target - open collector or TTL pulse (3.3 V dc), negative pulse (contact factory)
Output - Optional	TTL pulse, negative pulse, collector open circuit with internal pull-up resistor (4700 ohm), load of 3.3 V – 25 mA
Operating Temperature	14 ° F to 158 ° F (-10 ° C to 70 ° C)
humidity	Relative humidity 80%, temperature up to 88 ° F (31 ° C), linearly decreasing to 50% relative humidity 104 ° F (40 ° C)
connect	3.5mm [1/8 inch] public body sound plug (ROLS-P); Tin plated wire (ROLS-W)
cable length	8 feet [2.4 meters] or 25 feet [7.6 meters]
material	303 stainless steel, equipped with two M18 locking nuts and mounting bracket
lens	acrylic plastic
size	Threaded pipe 3.12 in. x 0.71 in. diameter [18 x 79.4 mm] long
*Specifications are subject to change without prior notice.