How much does the steel tape measure calibration device cost

1、 Product introduction of digital steel tape measuring device:

The numerical display steel tape measuring device adopts a segmented method to detect a measurement range of up to 200m. It can measure and read a tape with a width of 35mm. The microscope has a division value of 0.01mm. When the grating sensor is working normally, it is only used for measuring aiming.Digital display typeSteel tape measure calibration deviceThe use of a grating displacement sensor combined with a standard steel tape measure for instrument measurement data collection, and the direct provision of measurement result data through PLC data processing, reduces the intensity of manual labor.

2、 Technical parameters:

1) The steel tape measuring device for numerical display has a simple structure, easy installation, beautiful and practical appearance.
2) The main components (French code and handle) are electroplated, with a bright and elegant appearance.
3) Equipped with a heavy hammer unloading device, it can easily control loading and unloading.
4) Configure a reading microscope to conveniently and clearly display the error of the tested ruler.
5) The reading microscope is equipped with an illumination device Make the image very clear.
6) Install the reading microscope and lighting device on the measuring vehicle for easy operation. The measuring vehicle can be removed as a whole for easy storage and maintenance.
7) Using a support shaft to lift the standard ruler and the inspected ruler eliminates the friction between the tape and the table, thus improving the detection

Accuracy.

3、 Technical indicators:

Steel tape measure calibration deviceDetectable items: Level 1, Level 2 ordinary steel tape measure. Depth measuring steel tape (oil dipstick). Fiber tape measure. Large range measuring tools such as measuring ropes and tape measures.

1. Verification table external length: 5.3m (can be extended to 50m in any 5m segment according to user requirements)

2. Effective detection length: 5m (using segmented detection measurement range: (5-200m) m).

3. Accuracy of standard steel tape measure: (0.02+0.02L) mm

4. Calibration table guide gauge straightness: ≤ 0.3mm/m

5. Overall static friction force of the calibration table: ≤ 5N

6. Instrument small resolution: 0.01mm

7. The instrument comes with a built-in lighting device

8. Reading microscope: 20X0.01mm (0-8mm)

4、 Product Structure Diagram: