How much does the bicycle wading test device cost

Electric bicycle water immersion test deviceProduct Overview: Suitable for electric bicycles in deep waterTest the water wading performance of the electric bicycle by driving it at a speed of 15km/h for 500m or for a total time not exceeding 10 minutes in a 100mm pool. The equipment is particularly suitable for conducting water immersion tests on electric bicycles in laboratories with insufficient testing sites.

Electric bicycle water immersion test deviceCompliant with standards: According toGB17761-2018 and GB24155-2009 standards require design and production.

3、 Working conditions:RT+10 ℃~60 ℃, relative humidity ≤ 85%.

4、 Technical parameters:

1. Control mode: PLC control, touch screen human-machine interface operation, independent control box;

2. Testing station: 1 station;

3. Test specimen: maximum length of 1.8 meters, width of 0.6 meters;

4. Frame structure: Four piece assembled silicone sealing waterproof;

5. Test pool: stainless steel structure with water pump for waterproofing;

6. Sample fixing: Adjustable fixing bracket, allowing the front and rear wheels of the sample to be suspended for testing, with a height scale;

7. Speed regulation: driven by servo motor, connected to the speed control handle of the mechanical arm, and the rotation angle can be set on the touch screen;

8. Load configuration: The front handle weighs 10 kilograms, the central shaft weighs 20 kilograms, the saddle weighs 45 kilograms, and the weights are made of 304 stainless steel. They are connected or suspended to the sample using a fixed fixture;

9. Immersion method: Water pump supply, submerge the bottom of the tire by 100mm, and automatically stop when the water level reaches;

10. Drainage method: Direct drainage through sewers;

12. Sample transportation: equipped with a ramp platform;

13. Pool size: 3000 * 1500 * 800mm (L * D * H);

14. Equipment power supply: 220V 50Hz.