Welcome Customer !

Membership

Help

Nanjing Sapphire Environmental Protection Equipment Co., Ltd
Custom manufacturer

Main Products:

ag-mach>Products
Product Categories

Nanjing Sapphire Environmental Protection Equipment Co., Ltd

  • E-mail

    13675168122@139.com

  • Phone

    13675168122

  • Address

    Gangjia, Xingangwan Road, Liuhe Development Zone, Nanjing City Zhihui Industrial Park 9-2

Contact Now

Dry mixer drawing

NegotiableUpdate on 04/24
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Mixing reaction tank mixer lined with plastic and rubber anti-corrosion paddle mixer ZJ has a wide range of applications and can mix various liquids with different concentrations, media, and suspended solids

Product Details

Mixing reaction tank paddle agitator lined with plastic and rubber mechanical agitator ZJ coagulation and flocculation mixing equipment




Characteristics of paddle mixer system:

3.1 Widely applicable, it can stir various liquids with different concentrations, media, and suspended solids.

3.2 Stable operation, minimal vibration, and low noise.

3.3 Corrosion resistant, therefore it can be stirredpH3-10Various liquids.

3.4 If the equipment is not in use temporarily, it can be stored for a long time.

Operation of paddle mixer system:

4.1 Operators must have a job operation certificate or corresponding qualifications, and their scope of responsibilities and personnel management should have strict regulations. For personnel who have not operated it before, they must undergo excellent training and pass the training before they can proceed with the operation.

4.2 Operators need to read and familiarize themselves with the instructions before proceeding with the operation.

4.3 Before starting the dosing and mixing system, the operator needs to check whether the motor insulation is qualified, whether the motor bearings, intermediate bearings, and gearbox have been oiled according to regulations, whether the connecting bolts of each part are tightened, and whether the coupling is firmly connected.

4.4 Test the turning gear and notify the electrician to close and power on the motor.

4.5 Press the start button to make the mixer operate normally.

4.6 After the normal operation of the dosing and mixing system, it is necessary to2Conduct an hourly patrol inspection. Check if the motor temperature and bearing temperature are normal. If the motor temperature and bearing temperature exceed75℃Then the machine should be stopped immediately, and the cause should be identified and repaired by maintenance personnel. At the same time, check the transmission oil level. If there is no oil in the transmission oil cup, add oil to the cup at any time.

Mixing reaction tank paddle agitator lined with plastic and rubber mechanical agitator ZJ coagulation and flocculation mixing equipment