Direct supply bean belt selection machine, screening machine, soybean cleaning machine

Direct supply bean belt selection machine screening machine soybean cleaning machine uses the principle of different sliding friction coefficients and rolling friction coefficients caused by the different shapes and densities of materials under the action of gravity acceleration to process and grade materials. The vertical and horizontal inclination angles can be adjusted freely. Stepless speed regulation, especially suitable for round grain shapes, especially for processing beans with good results. Irregular particle shapes such as stones, sand, and broken particles can be selected at once.

Can be matched with a stone removal machine:

The machine is a floating shaft rotating machine equipped with a balancing device. It has a simple structure, smooth operation, small size, high efficiency, and is safe and reliable. Suitable for various grain seeds, such as wheat, beans, rice, sorghum, etc., that have been cleared of large and small impurities. After processing by this machine, impurities such as stones, sand particles, bricks, and mud blocks that are heavier than seeds can be removed, especially for sand and stones with particle sizes similar to seeds, with significant results.

Direct supply bean belt selection machine, screening machine, soybean cleaning machineadvantage：

1. Equipped with comprehensive wind selection and dust removal devices, it can effectively collect dust and light impurities, and has good environmental friendliness, thereby avoiding pollution of the working environment;

2. Integrating wind selection, screening, and specific gravity selection, reducing labor, saving space, and reducing energy consumption;

3. Suitable for processing various materials, it can replace selected equipment for occasions with low cleanliness requirements;

4. The selection is driven by a vibration motor, while the specific gravity selection is driven by an eccentric motor, which has good stability;

5. Adopting an ultra-low speed non crushing elevator with a belt speed of less than 0.5 meters per second to reduce crushing losses;

6. First, filter out the small and large impurities, and then pass them through the specific gravity table to reduce the processing pressure of the specific gravity table and improve the yield and cleanliness;

7. The finished product of this machine can be connected to vibrating grading screens of different lengths for export.

Direct supply bean belt selection machine, screening machine, soybean cleaning machineMaintenance:

Before starting the homework, check whether the connecting screws of each part are tightened, whether the transmission parts rotate flexibly, whether there are any abnormal sounds, and whether the tension of the transmission tape is appropriate.

2. When changing varieties during the homework process, the remaining seeds in the machine should be cleaned up, and the machine should continue to operate for 5-10 minutes. At the same time, the front and rear air volume adjustment handles should be turned on and off several times to eliminate the remaining seeds and impurities deposited in the front, middle, and rear chambers.

If it is necessary to work outdoors due to limited conditions, the machine should be parked in a sheltered place and placed downwind to reduce the impact of wind on the selection effect. When the wind speed exceeds level 3, consideration should be given to installing windproof barriers.

4. Before each assignment, the lubrication point should be oiled, and after completion, it should be cleaned and inspected, and faults should be promptly eliminated.