Dechang manure cleaning machine/scraper

Dechang manure cleaning machine/Fecal scraper

Product Overview

The manure cleaning machine is a new product produced in recent years according to the needs of farmers, with the continuous development and expansion of the breeding industry. The emergence of manure cleaning machines in aquaculture has greatly reduced the labor intensity and labor costs, bringing good news to farmers.

The Dechang series traction type manure cleaning machine is mainly composed of a main chassis, corner wheels, traction ropes, and a scraper plate. The motor drives the reducer to work, and the scraper plate is pulled by the sprocket to complete the manure cleaning work.

This manure cleaning machine is mainly used in cattle farms, sheep farms, pig farms, chicken farms, rabbit farms, and some special breeding industries. The width of the manure scraper plate is determined according to the customer's designed manure ditch size.

Product Features

Adopting the most advanced national standard cycloidal pinwheel reducer to ensure the rationality of output transmission ratio.

The direct connection between the motor and the reducer has a small volume and is easy to operate.

The special thickened scraper ensures the super long service life of the manure cleaning machine.

The scraper is made and shaped by high-precision CNC machine tools and never deforms.

The special transmission chain is super wear-resistant, corrosion-resistant, and has a long service life.

Installation method

① Ditch:

It is generally recommended to design trenches with one side deep and the other shallow,The deep side should be the place for defecation and fixing the host, while the deep side is usually designed as35-40Centimeters, the shallow end is usually designed as28-35Centimeters are sufficient, which makes it easier to rinse with water during cleaning,Water flows towards one end, making it easier for the host to hide underground.

② Host

Host installation should be excavated1Mi Jian Fang,deep70A centimeter pit, then pour the concrete. After pouring, the upper surface should be lower than the bottom of the trench12-13Centimeters, it is best to use pre embedded iron to facilitate the installation of the host. Just use a few welding points, or use large expansion screws.

③ Corner wheel

Be sure to pay attention when installing corner wheels,Referring to the installation diagram, the edge of the groove around which the rope is wound is the center, not the axis of the steering wheel. If the center is found incorrectly, the manure board will deviate and become unstable when scraping. After finding the center, pour concrete until the corner wheel axle is exposed4Centimeters are sufficient. Measure the height of the corner wheel from the bottom of the ditch upwards25Centimeter, cement pier60*60.

④ Wrap the rope

When winding the rope, first wrap one end of the rope around the two winding wheels of the main machine, and then wrap the corner wheel. Finally, fasten it on a scraper board.

⑤ Tight rope

There should be a tight rope2Individual,1I personally turned on the switch, and1A person wraps the rope around the scraper rack, then attaches the end of the rope to the shaft of the corner wheel where it is fixed. One person pulls the rope, the other turns on the switch, and the host tightens the rope.

Precautions

Attention should be paid to maintenance when using a manure cleaning machine.

The reducer must be added before use40#Engine oil or mechanical grease must also be used regularly during use（10Add engine oil to ensure the normal operation of the gearbox.

Before using the manure cleaning machine, please check whether the bolts and screws of each component are tightened. If there are loose screws, please tighten them before use.

After the installation of the manure cleaning machine is completed, it should be put into trial operation first. During the operation, there should be no abnormal noise, noise, or vibration. If the operation is not normal, please debug it before use.

Do not repair or maintain the manure cleaning machine during operation. Please turn off the power during maintenance.