Corrosion resistant QJB submersible mixer production

304 stainless steel submersible mixer, self falling electric mixing pusher

Name: First level wastewater tank submersible agitatorBrand:sapphire, Model:QJB5/12-620/3-480， Power: 5.0kw, impeller diameter: 620mm, speed: 480r/min, material: stainless steel, suitable for mixing or pushing flow of urban sewage, industrial wastewater, dilute slurry and other slurries.

304 stainless steel submersible mixer, self falling electric mixing pusher

Nanjing Sapphire Environmental Protection Equipment Co., LtdAfter sales service for submersible mixers

Service commitment: Nanjingsapphirein the spirit ofThe concept of "technological innovation, winning by quality" and the principles of responsibility and openness solemnly promise to users:

The product is accompanied by an instruction manual to ensure that users can correctly install and use our company's products. The company guarantees that all products leaving the factory are produced and inspected according to relevant industry standards, and products that do not comply will never leave the factory. Ensure strict implementation of the three guarantees for products and strictly adhere to relevant national regulations on after-sales service for industrial products.

Please be patient after reading. The submersible mixer (submersible thruster) is intended for long-term use with low failure rate. Please pay attention to the following points when installing and using it:

1. Cable protection: After the installation of the submersible mixer is completed, please pay attention to the mixer mainframeDrop to the bottom bracket of the guide rod, tighten the cable and secure it before starting up and running; If you need to lift the mixer, please make sure to turn off the power and protect the cables to avoid cable damage when lifting the main unit. During installation, attention should also be paid to cable protection, and cable ends should not be placed in water. The cable is the weak part of the mixer, please start it before turning it onneedFixed and well protected.

2. Keep the mixing tank clean: The submersible mixer is a high-speed operating equipment. Please keep the mixing tank clean and promptly salvage floating objects to prevent them from being twisted into the equipment, causing entanglement or damage to the main unit. Before installation, clear the sediment at the bottom of the tank before installation and use. Please note: There should be no debris, fibers, plastic bags, ropes, steel blocks, stones, or other tangled or hard objects in the pool to avoid damaging the main unit.

3. The submersible mixer is placed on an underwater bracket: Due to the heavy weight of the submersible mixer equipment, the installation system only serves the purpose of lifting and hoisting. Please lift the equipmentFall on the underwater bracket and do not suspend the submersible mixer in the middle of the guide rod for a long time to avoid problems such as deformation and bending of the lifting bracket.

4. When installing the guide rod, pay attention to fixing it up and downofThe point needs to be vertical, with a pivot axis/Connect the components in one line to avoid uneven stress caused by the tilting of the guide rod.

Thank you for your support and understanding! Wishing you a pleasant use!