- Phone
- Address
Product Categories
- system
- disc harrow
- Pick up the cutting table
- Half track tractor
- Joint land preparation machine
- Spray machine
- Rigid grain cutting table
- Rigid inclined belt cutting platform
- Axial flow drum combine harvester
- seeder
- tractor
- Grain cutting table
- Folding corn harvester
- Sugarcane harvester
- combine harvester
- cotton picker
- Crawler tractor
- Mower conditioner
- wheeled tractor
- Harvester
CNH
Case WD1203 self-propelled lawn mower and flattening machine
NegotiableUpdate on 07/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Case WD1203 self-propelled lawn mower flattening machine main technical parameters model WD1203 engine mechanical
Product Details
Key Technical Parameters of Case WD1203 Self propelled Lawn Mowing Flattening Machine
| model | WD1203 |
| engine | Mechanical, 4-cylinder, displacement 4.5 liters |
| Rated power (horsepower) | 126 |
| **High power (horsepower) | 126 |
| Fuel tank capacity (liters) | 454 |
| Rotating cleaning brush for radiator | Standard configuration |
| Transmission | Hydrostatic pressure |
| **Final drive | Planetary Wheel |
| Hydraulic steering | Static hydraulic pressure |
| Speed range (km/h) | 0-17 working status |
| 0-25.4 Highway status | |
| parking brake | Standard configuration, operated switch control |
| Length of cutting table (mm) | 7125 (HDF cutting platform) |
| No cutting table length (mm) | 5138 |
| Height (millimeters) | 3444 |
| Wheelbase (millimeters) | 3627 |
| Front wheel width (mm) | 3772 |
| Rear wheel width (adjustable) (millimeters) | 2286/2667/3048 |
| **Small ground clearance (mm) | 1080 |
| Cutting table drive | Hydraulic drive |
| Floating imitation of cutting table | Hydraulic Control |
| Hydraulic control for tilting the cutting table | Standard configuration, operated switch control |
| Host weight (kg) | 4738 |
| Type of cutting table | Disc cutting table | Reciprocating cutting table |
| Specific model | RD163 | HDX142 |
| swath | 4.9m | 4.34m |
| Approximate weight | 2132kg | 1770kg |
| Cutting height | 18-89mm | 30-157mm |
| Cutting knife form | Disc swinging knife | CNH reciprocating cutting knife |
| Number of blades 20 (10 * 2) | Pulling wheel speed 52-83rpm | |
| Speed of swinging/cutting blade | 2500rpm | 1810spm |
| conditioner roll | herringbone | herringbone |
| material | rubber | rubber |
| Roller length | 2591mm | 2590mm |
| Roller speed | 938rpm | 717rpm |
| Strip width | 965-2438mm | 910-2438mm |
| Type of cutting table | Sun cutting table |
| Specific model | HD213 |
| swath | 6.4m |
| Cutting height | 19mm (when the cutting table angle is 8 °) |
| Laying type | Middle laying |
| Cutting knife form | CNH reciprocating cutting knife |
| rotational speed | 1400spm |
| Cutting inclination angle | 2~8 |
| Type of reel | 6 pairs of degrees |
| Elastic tooth material | Reinforced plastic elastic teeth |
| Pulling wheel speed | 10-75rpm |
