- Phone
- Address
Product Categories
- system
- disc harrow
- Pick up the cutting table
- Half track tractor
- Joint land preparation machine
- Spray machine
- Rigid grain cutting table
- Rigid inclined belt cutting platform
- Axial flow drum combine harvester
- seeder
- tractor
- Grain cutting table
- Folding corn harvester
- Sugarcane harvester
- combine harvester
- cotton picker
- Crawler tractor
- Mower conditioner
- wheeled tractor
- Harvester
CNH
Case MAGNUM3104 Wheel Tractor
NegotiableUpdate on 09/25
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Case MAGNUM3104 Wheel Tractor Product Introduction CURS0R9 series that meets National 3 emission standards, with a 6-cylinder high-pressure common rail engine and power boost function
Product Details
Case MAGNUM3104 Wheel Tractor Product Introduction
- CURS0R9 series, compliant with National Emission Standard 3, features a 6-cylinder high-pressure common rail engine with power boost function.
- Advanced full power transmission with 18 forward gears and 4 reverse gears, and a power shuttle lever with memory function.
- Automatic differential lock and automatic four-wheel drive improve traction performance and operational efficiency.
- The automatic production management function and ground management function greatly improve work efficiency.
- Powerful hydraulic and suspension system, large hydraulic flow, capable of cooperating with various hydraulic operations; High lifting power, can be equipped with wider and heavier agricultural tools.
- Comfortable suspended seats and ergonomic armrest controllers, as well as cold and warm air conditioning and low noise levels, greatly reduce driving fatigue intensity.
Technical parameters of Case MAGNUM3104 wheeled tractor
| model | MAGNUM3104 |
| engine | |
| Number of cylinders/valves/displacement | 6 dyl/24 valves/8.7L |
| Air Intake method | Exhaust gas bypass, turbocharging |
| rated power HP@2000RPM | 315 |
| maximum power HP@1800RPM | 345 |
| Rated power after increase HP@2000RPM | 345 |
| Increased peak power HP@1800RPM | 382 |
| PTO power HP@2000RPM | 265 |
| Electrical system | |
| Engine/battery | 200 amperes/2 pieces of -12V battery |
| gearbox | |
| Full power shift: 18 forward+4 reverse -40KPH | standard configuration |
| wheelbase | |
| Full power shift model | 3050mm |
| hydraulic system | |
| System Type | Pressure Flow Compensation (PFC) |
| Remote output valve | 4-way electrically controlled hydraulic valve |
| Hydraulic output system flow rate | 166L/min |
| Rear three-point suspension type | Cat 4N/3 |
| Maximum lifting force @ 610mm | 8777kg |
| capacity | |
| Fuel tank capacity | 710L |
| Overall dimensions | |
| Length x Width x Height mm | 480/70R34 pairs/520/85R46 pairs |
| 6150×3792×3398 | |
| weight | |
| Approximately shipping weight | 12284kg |
| maximum operational weight | 16260kg |
| Autonomous driving navigation equipment | |
| Autonomous driving navigation equipment | Standard configuration (including display, receiver, navigation control module, mobile base station and other navigation system components) |
