-
E-mail
wnd8808@163.com
-
Phone
18502293228
-
Address
No. 3 Jingxiang Road, Beichen Science and Technology Park, Beichen District, Tianjin
Product Categories
Tianjin Wonengda Industrial Co., Ltd
1.5KW aeration surge aerator
NegotiableUpdate on 10/03
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
1.5KW aeration surge aerator
Product Details
1.5KW aeration surge aerator
1Main structure:
Aeration type surge typeaeratorIncluding motor, gearbox, floating body, and impeller.
2Structure Introduction:
The gearbox comprises a housing and an output shaft. The upper end of the output shaft is connected to the rotating shaft of the motor through a variable speed component, and the lower end is connected to the impeller. The characteristic of the gearbox is that the rotating shaft of the motor is connected to the housing and can drive the housing to rotate. The floating body is a circular ring structure, and several surge plates are set on the outer circumference of the floating body. The floating body is fixedly connected to the housing. It drives the gearbox housing to rotate through the motor, and the floating body fixedly connected to the housing is driven to rotate by the housing, so that the floating body set on the outer periphery of the floating body can rotate accordingly, thereby achieving surging and improving the oxygenation effect. It has a simple structure, low power, and good oxygenation effect.
3Working principle:
Aeration surge typeaeratorIt is a relatively new product in aquaculture oxygenation equipment, and its major design advantage is energy saving. The principle of oxygenation is different from that of impeller and waterwheel. The unique flower shaped spiral impeller, combined with an annular float, can cause the output water to erupt upwards, causing a certain area of water to boil, thereby increasing the contact between water and air during the eruption process and improving the dissolved oxygen content of the water. At the same time, when water is sprayed upwards, it directly passes through the motor and gearbox, allowing them to work for a long time without heating up under the cooling of water. This eliminates the common problems of heating up, increasing current, and burning out caused by long-term operation of the motor, and can also300—350Normal operation under ultra-low voltage of watts.
4Main technical specifications:
|
model Model |
powerPower （Kw） |
voltageVoltage (V) |
Power efficiencyPower Etticiency (Kg/kw) |
Oxygenation abilityAerobic Capacity (Kg/h) |
currentElectric Current (A) |
Load water surfaceLoading Area (mu) |
weightWeight (Kg) |
|
YLZ1.5 |
1.5 |
380 |
1.5 |
2.74 |
3.8 |
6-8 |
34 |
|
YLZ1.1 |
1.1 |
380 |
1.5 |
2.5 |
2.7 |
4-6 |
32 |
|
YLZ1.5 |
1.5 |
220 |
1.5 |
2.5 |
12 |
5-8 |
34 |
|
YLZ11 |
1.1 |
220 |
1.4 |
2.4 |
9.5 |
4-6 |
32 |
5Technical performance:
5.1.Water lifting function: It has a powerful water lifting ability (replacing the bottom water with the surface and outputting it along the water surface), effectively reducing the content of harmful substances and gases such as ammonia nitrogen, nitrite, hydrogen sulfide, and Escherichia coli in the water body, improving pond bottom quality, and curbing water pollution.
5.2.Wave making function: The powerful wave making ability greatly increases the contact area between water and air, and through aeration, air contact, algae photosynthesis, ultraviolet irradiation and other pathways, increases the oxygen load of the entire water body, improves water quality, and reduces sewage discharge.
The above information is from Tianjin Wonengda Industrial Co., Ltd http://www.tj-wnd.com Please indicate the source when reprinting. If you have any technical questions, please call the national * consultation hotline:!
