Product Features:
1. Large output: The large countertop design greatly increases the stone removal output;
2. High configuration: Adopting an aluminum frame tabletop, the tabletop is not easily deformed or cracked;
3. High configuration: The stone removal countertop is made of stainless steel woven mesh, which extends its service life;
4. Add anti blowing function to the stone outlet, effectively reducing the material carryover ratio in the stones;
5. Imported laser cutting is used for sheet metal parts to ensure accuracy; The whole machine is bolted together to avoid welding deformation.
Scope of application:
It can be adjusted by frequency and air volume, suitable for removing stones from different products such as small particle materials (millet, sesame), medium particle materials (mung beans, soybeans), and large particle materials (kidney beans, broad beans).
Suitable for the selection of single purpose materials, it can effectively remove heavier impurities such as shoulder stones (sand and gravel with similar particle size to the material) in the material. In the process of grain processing, it should be installed in the later stage of the screening process. Raw materials without removing large, small, and light impurities should not directly enter the machine to avoid affecting the stone removal effect.
Operation:
① Before starting up, check if the air door is closed properly and inspect the inlet and outlet ports Is the screening surface normal.
② When starting up, first turn on the fan, then start the stone removal machine, and then start feeding. When the material covers most of the screen surface, gradually open the material door to make the material on the screen slightly boil, and the oil begins to flow steadily downwards; Adjust the reverse airflow to form a clear boundary between material and stone along the aggregate zone on the screen surface, and ensure normal stone discharge.
③ During the operation of the equipment, the running status of the screened materials, the stone discharge situation, and the material content in the stones should be checked regularly. If any abnormalities occur, they should be resolved promptly. There are many factors that affect the operation of the stone removal machine, which need to be carefully analyzed and resolved.
④ During operation, if the incoming material is interrupted and production is still required in a short period of time, the movement of the screen body should be suspended to prevent the material from running out on the screen surface.
⑤ When shutting down, stop feeding the machine first. Once the feeding stops, shut down the machine to prevent stones from accumulating in the machine, and then stop the suction.